Niagara Cutter 33944 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 8.5" Overall Length, 2.000" Cutting Diameter, 1.250" Shank Diameter

You looking to find the "Niagara Cutter 33944 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 8.5" Overall Length, 2.000" Cutting Diameter, 1.250" Shank Diameter" Good news! You can purchase Niagara Cutter 33944 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 8.5" Overall Length, 2.000" Cutting Diameter, 1.250" Shank Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $309.22    

Product Feature

• 37-degree helix provides efficient chip evacuation required to machine aluminum and other nonferrous materials
• Three flutes provide a finer finish than two flutes, reducing the need for a second finishing cut in some applications
• Rounded area behind the cutting edge (cylindrical land) stabilizes the tool in the cut and leaves a smooth finish on the workpiece
• Low surface-roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials

Product Description

The Niagara Cutter A337 uncoated high-speed steel square nose end mill has three flutes and a 37-degree helix for milling aluminum and other non-ferrous materials. The 37-degree helix angle gives more support behind the cutting edge than higher angles and offers increased cutting action and chip evacuation compared to the conventional 30-degree helix. It efficiently cuts aluminum and other non-ferrous material, moving material up the spiral and away from the workpiece. The end mill’s three flutes remove excess material from the cutting area and provide a third cutting edge to create an improved finish that may eliminate the need for a second finishing cut in some applications. The rounded area behind the cutting edge, called the cylindrical land, stabilizes the tool and smoothes the surface of the workpiece, minimizing tool vibration (chatter) when machining non-ferrous materials. The cutting edge is treated with extra grinding passes, minimizing surface roughness and creating a low-friction surface on the cutting edge to help prevent chips from sticking to the tool.

High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of material. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The tool has an eccentric primary relief feature that provides better support behind the cutting edge than a flat relief, reducing tooth breakage in deep cuts. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter 33944 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 8.5" Overall Length, 2.000" Cutting Diameter, 1.250" Shank Diameter Review

Used in a Tormach 3-axis CNC mill, it removes material just fine, but it doesn't produce a smooth finish like most end mills. There's noticeable grooving. I'm not sure why.

Most of the consumer Reviews tell that the "Niagara Cutter 33944 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 8.5" Overall Length, 2.000" Cutting Diameter, 1.250" Shank Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Niagara Cutter 33944 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 8.5" Overall Length, 2.000" Cutting Diameter, 1.250" Shank Diameter ...

Goodyear EP Spiraflex Black PVC Dewatering Hose, 2 Piece Kit with Strainer, 55 PSI Maximum Pressure, NULL Length, 3" ID

You looking to find the "Goodyear EP Spiraflex Black PVC Dewatering Hose, 2 Piece Kit with Strainer, 55 PSI Maximum Pressure, NULL Length, 3" ID" Good news! You can purchase Goodyear EP Spiraflex Black PVC Dewatering Hose, 2 Piece Kit with Strainer, 55 PSI Maximum Pressure, NULL Length, 3" ID with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $337.88    

Product Feature

• Dewatering pump hose kit
• Includes 20' suction hose
• Also includes 50' discharge hose and suction strainer
• Measures 3" ID

Product Description

Dewatering pump hose kit. Includes 20' suction hose. Also includes 50' discharge hose and suction strainer.

Goodyear EP Spiraflex Black PVC Dewatering Hose, 2 Piece Kit with Strainer, 55 PSI Maximum Pressure, NULL Length, 3" ID Review

Well-designed product, all the way around. The item was purchased for use with a 7hp trash pump, connected to a gold mining power sluice. These hoses handle the pump with ease, once I weigh down the intake screen. In addition, I have used to drain a 18k gallon pool. Still no leaks in any portion. All connections, and jackets are made of quality materials. Would recommend this product for even the most industrial environments.

Most of the consumer Reviews tell that the "Goodyear EP Spiraflex Black PVC Dewatering Hose, 2 Piece Kit with Strainer, 55 PSI Maximum Pressure, NULL Length, 3" ID" are high quality item. You can read each testimony from consumers to find out cons and pros from Goodyear EP Spiraflex Black PVC Dewatering Hose, 2 Piece Kit with Strainer, 55 PSI Maximum Pressure, NULL Length, 3" ID ...

Rockwood K1050 Rectangular Kick Plate, Brass with Polished Clear Finish, 34" Width x 34" Height x 3/64" Thickness

You looking to find the "Rockwood K1050 Rectangular Kick Plate, Brass with Polished Clear Finish, 34" Width x 34" Height x 3/64" Thickness" Good news! You can purchase Rockwood K1050 Rectangular Kick Plate, Brass with Polished Clear Finish, 34" Width x 34" Height x 3/64" Thickness with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $306.09    

Product Feature

• Rectangular 3/64"-thick kick plate protects the lower portion of a door from damage
• Recommended for doors 36" wide when used on the push side and for doors 35-1/2" wide when used on the pull side
• Brass is a strong metal with a golden color
• Surface has been polished for shine and covered with a clear powder coating for increased durability
• Mounting fasteners are included for installation

Product Description

The Rockwood K1050 series rectangular polished brass kick plate with clear finish covers the lower portion of a door to protect it against damage such as dents, scrapes, and scuffs. This kick plate can be used on either the push or the pull side of a door. It measures 34 x 3/64 inches (W x T) and is recommended for use with 36"-wide doors when used on the push side and with 35-1/2"-wide doors when used on the pull side. (W is width, the horizontal distance from left to right; T is thickness, the distance from front to back.) The plate is made from brass, which is a strong metal with a golden color. The surface has been polished for shine and finished with a clear powder coating for increased durability. The plate has 10 mounting holes and installs using the included #6 x 5/8" stainless steel screws.

Kick plates help protect the lower portion of a door from damage. Also called door, mop, and armor plates, they are manufactured in a range of materials, finishes, and sizes.

Rockwood Manufacturing Company manufactures door hardware. The company, founded in 1946, is headquartered in Rockwood, PA.

What’s in the Box?

• Kick plate
• Mounting hardware

Rockwood K1050 Rectangular Kick Plate, Brass with Polished Clear Finish, 34" Width x 34" Height x 3/64" Thickness Review

Solid brass kick plate at a reasonable price. After much looking around, I found this to be 33% thicker than other comparably priced kick plates. Mine arrived well packaged but, even so, had a bent corner. It was easily repaired prior to installation.

Most of the consumer Reviews tell that the "Rockwood K1050 Rectangular Kick Plate, Brass with Polished Clear Finish, 34" Width x 34" Height x 3/64" Thickness" are high quality item. You can read each testimony from consumers to find out cons and pros from Rockwood K1050 Rectangular Kick Plate, Brass with Polished Clear Finish, 34" Width x 34" Height x 3/64" Thickness ...

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, ASTM A276, 0.75" Thickness, 6" Width, 72" Length

You looking to find the "304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, ASTM A276, 0.75" Thickness, 6" Width, 72" Length" Good news! You can purchase 304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, ASTM A276, 0.75" Thickness, 6" Width, 72" Length with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $514.51    

Product Feature

• 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability
• Unpolished (mill) surface has no finish
• Meets ASTM A276 specifications
• Annealed after shaping to modify the metal's properties
• Standard tolerance

Product Description

The 304 stainless steel rectangular bar has an unpolished (mill) surface, has been annealed, meets American Society for Testing and Materials International ASTM A276 specifications, and has a standard tolerance. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The material is typically nonmagentic but may become slightly magnetic when cold worked. The material has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.

Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes: austenitic, duplex, ferritic, martensitic, and precipitation hardening. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. The precipitation-hardening (PH) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel.

Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Magnetism characterizes how much the material is repelled by or attracted to a magnet.

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, ASTM A276, 0.75" Thickness, 6" Width, 72" Length Review

The Product worked fine. Met my expectations. I would happy to recommend this product. Very good overall cost. So there you are

Most of the consumer Reviews tell that the "304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, ASTM A276, 0.75" Thickness, 6" Width, 72" Length" are high quality item. You can read each testimony from consumers to find out cons and pros from 304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, ASTM A276, 0.75" Thickness, 6" Width, 72" Length ...

Polyester Mesh Sheet, Opaque Off-White, 40" Width, 10 yards Length, 125 microns Mesh Size, 34% Open Area (Pack of 1)

You looking to find the "Polyester Mesh Sheet, Opaque Off-White, 40" Width, 10 yards Length, 125 microns Mesh Size, 34% Open Area (Pack of 1)" Good news! You can purchase Polyester Mesh Sheet, Opaque Off-White, 40" Width, 10 yards Length, 125 microns Mesh Size, 34% Open Area (Pack of 1) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $416.81    

Product Feature

• Gamma Steriizable
• Good Solvent Resistance
• Good UV Resistance
• Mesh Opening Size 125 Microns
• Precise Opening Size

Product Description

Polyester Screen cloth: Unaffected by most solvents, Polyester PETP (Polyester, Polyethylene Terephthalate) has good resistance to strong acids at room temperature and resists weak acids and alkalies even at high temperatures; strong alkalies can weaken it. UV resistance is good, but it tends toward a slight loss of tensile strength with prolonged exposure to sunlight. Lacks good hydrolysis resistance, but retention of properties after gamma radiation exposure is good. Deformation under low stress is minimal, but it can deform under high stress.

Polyester Mesh Sheet, Opaque Off-White, 40" Width, 10 yards Length, 125 microns Mesh Size, 34% Open Area (Pack of 1) Review

I bought this to make an air filter for my computer. At first i considered getting the more dense, smaller opening, mesh screens but opted out thinking it would be too restrictive. These are fine as is, but they are pretty big holes. I had a lot of extra material so i doubled it up, no dust is getting past this. I say you are better off getting the smallest one on amazon if you want to use it as an air filter but this will do fine. picture a window screen made out of plastic

Most of the consumer Reviews tell that the "Polyester Mesh Sheet, Opaque Off-White, 40" Width, 10 yards Length, 125 microns Mesh Size, 34% Open Area (Pack of 1)" are high quality item. You can read each testimony from consumers to find out cons and pros from Polyester Mesh Sheet, Opaque Off-White, 40" Width, 10 yards Length, 125 microns Mesh Size, 34% Open Area (Pack of 1) ...

EFK Escrima Fighting, Black Aluminum Handle, Plain, Zytel

You looking to find the "EFK Escrima Fighting, Black Aluminum Handle, Plain, Zytel" Good news! You can purchase EFK Escrima Fighting, Black Aluminum Handle, Plain, Zytel with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $500.00   

Product Feature

• Features a 5
• 88 in
• 440C stainless steel blade and a 5
• 62 in
• black aluminum handle

Product Description

Features a 5.88 in. 440C stainless steel blade and a 5.62 in. black aluminum handle. Comes complete with a Kydex sheath.ATTRIBUTES Blade Detail: Plain Edge Blade Length (inches): 5.88 Blade Material: 440C Carry System: Zytel Sheath Handle Material: Aluminum Overall Length (inches): 11.50

EFK Escrima Fighting, Black Aluminum Handle, Plain, Zytel Review

I don't know what T. Lee is talking about. This is a full tanged, 440C stainless blade and the handle is well constructed. 440C is not the sharpest type of steel you can buy, but is used in some the worlds best survival/tactical fixed blades. The potential buyer should be reminded that this is not a survival knife, it is a fighting knife. Blade sharpness is good enough to do what the instrument was designed for. Get it quick though, Boker is discontinuing this model. It's well worth the money, in my view.

Most of the consumer Reviews tell that the "EFK Escrima Fighting, Black Aluminum Handle, Plain, Zytel" are high quality item. You can read each testimony from consumers to find out cons and pros from EFK Escrima Fighting, Black Aluminum Handle, Plain, Zytel ...

Tygon Tygothane C-210-A Abrasion-Resistant Precision Tubing, 5/8" ID, 13/16" OD, 3/32" Wall, 100' Length, Clear

You looking to find the "Tygon Tygothane C-210-A Abrasion-Resistant Precision Tubing, 5/8" ID, 13/16" OD, 3/32" Wall, 100' Length, Clear" Good news! You can purchase Tygon Tygothane C-210-A Abrasion-Resistant Precision Tubing, 5/8" ID, 13/16" OD, 3/32" Wall, 100' Length, Clear with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $322.48    

Product Feature

• Abrasion-resistant plastic tubing for fluid transfer in fuel, pneumatic, abrasive, and cable jacketing applications
• Tygothane formulation C-210-A polyurethane to resist tearing, cracking, and other deterioration during oil and fuel use
• Clear construction to allow visual monitoring of flow
• Working temperature range of -100 to 175 degrees F and durometer (hardness) of 82A
• Meets FDA CFR21 177.2600e and EU Directive 2002/72/EC criteria for quality assurance

Product Description

This clear plastic tubing is made of plasticizer-free Tygon Tygothane formulation C-210-A polyurethane and is designed for use in fuel, pneumatic, abrasive, and cable jacketing applications. The clear tubing allows unobstructed visual monitoring of flow. The Tygon Tygothane formulation C-210-A polyurethane construction maintains flexibility in subzero temperatures, resists tears and abrasion, and can sustain prolonged exposure to oils, greases, fuels, and various solvents and chemicals without cracking or swelling. It contains no plasticizers, such as Di(2-ethlhexyl)phthalate (DEHP), which could contaminate transferred fluids. The tubing has a working temperature range of -100 to 175 degrees F, a durometer (hardness) of 82A, and working pressure ratings that vary by tube size. This plastic tubing is rated as flexible as it bends more easily than rigid tubing, but not as easily as very flexible tubing. It meets U.S. Food and Drug Administration (FDA) 21 CFR 177.2600e and European (EU) Directive 2002/72/EC criteria for food contact for quality assurance. This plastic tubing is not designed for use as an implant material, but it is suitable for use in instrumentation control lines, coolant recovery systems, food and cosmetic processing, and transferring abrasive slurries, pellets, and powders, among other applications.

Plastic tubing is used to transfer liquids, air, or solids, and it is characterized by a round, rectangular, or square shape and a hollow center. Plastic tubing is crimp-resistant and varies in bend radius (flexibility), chemical resistance, wall thickness, durometer hardness, and temperature and pressure handling abilities. The clarity of plastic tubing may be transparent (clear), translucent (semi-clear), or opaque (solid), and the tubing's coloring may indicate suitable applications. Barbed fittings are used to connect tubing or redirect flow in a fluid handling system. Plastic tubing is used in a wide variety of industries, such as agriculture, automotive, laboratory, and medicine. Applications for plastic tubing include blood and fluid handling, peristaltic pumps, electrical and thermal insulation, analytical systems, and food and beverage handling, among others.

Saint-Gobain Corporation manufactures plastic tubing for the food and beverage, chemical processing, industrial, laboratory, medical, pharmaceutical, and semiconductor processing industries under the Tygon brand in the Saint-Gobain Performance Plastics sector. Founded in 1665, the company is headquartered in Courbevoie, France, and operates 45 plastics manufacturing sites worldwide.

Tygon Tygothane C-210-A Abrasion-Resistant Precision Tubing, 5/8" ID, 13/16" OD, 3/32" Wall, 100' Length, Clear Review

This product is supposed to be compatible with Food applications, but it comes completely coated in a mysterious white powder. Should it come this way or is this a faulty product?

Most of the consumer Reviews tell that the "Tygon Tygothane C-210-A Abrasion-Resistant Precision Tubing, 5/8" ID, 13/16" OD, 3/32" Wall, 100' Length, Clear" are high quality item. You can read each testimony from consumers to find out cons and pros from Tygon Tygothane C-210-A Abrasion-Resistant Precision Tubing, 5/8" ID, 13/16" OD, 3/32" Wall, 100' Length, Clear ...

Loos Stainless Steel 302/304 Nylon Coated Wire Rope, 7x19 Strand Core, Red, 1/4" Bare OD, 5/16" Coated OD, 250' Length, 6400 lbs Breaking Strength

You looking to find the "Loos Stainless Steel 302/304 Nylon Coated Wire Rope, 7x19 Strand Core, Red, 1/4" Bare OD, 5/16" Coated OD, 250' Length, 6400 lbs Breaking Strength" Good news! You can purchase Loos Stainless Steel 302/304 Nylon Coated Wire Rope, 7x19 Strand Core, Red, 1/4" Bare OD, 5/16" Coated OD, 250' Length, 6400 lbs Breaking Strength with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $349.09    

Product Feature

• Red-colored wire rope for ease of recognition
• Stainless steel 18-8 is corrosion-resistant, and withstands high temperatures for a wide range of operation
• Stainless steel is a versatile material, commonly used in a wide variety of applications, and in saline atmospheres
• Nylon-coating has excellent abrasion-resistance, and resists crushing and cracking
• 7x19 strand core is more flexible and fatigue-resistant than 7x7 class construction

Product Description

Nylon-coated, stainless steel wire rope with 7x19 standard construction can be used over pulleys, rigging, winches, in exercise equipment, garage door mechanics, and for yachting ropes and control cables. This wire rope is red-colored for ease of recognition. Stainless steel 304, also called 18-8, is corrosion-resistant, resists scaling, and withstands high temperatures for a wide range of operation. Stainless steel is a versatile material, commonly used in a wide variety of applications, and in saline atmospheres. Nylon coating is very strong, lightweight, and flexible, has excellent abrasion-resistance, and resists crushing and cracking. 7x19 strand core has seven strands of wire rope with nineteen wires in each strand formed helically around a strand core. 7x19 strand core is more flexible and fatigue-resistant than 7x7 class construction.

Wire rope, also called wire cable, is an assembly of wire strands formed helically around a central core. It is used for pulling, lifting, rigging, hoisting, and motion-control applications most commonly found in the manufacturing, marine, oil, mining, fiber-optics, aircraft, automotive accessory, and construction industries. A combination of characteristics including material, finish, construction, diameter, length, and breaking strength combines to give each rope its performance ability. Wire rope materials are selected for properties such as strength, elasticity, conductivity, and chemical- and weather-resistance. For strength purposes, most wire rope is made of bright (uncoated or bare) wire. However, it is also produced in a variety of finishes, such as polypropylene (PE), vinyl (PVC), or nylon. These coatings can increase overall durability and strength, and allow for specific use. The breaking strength for wire rope is the strength at which new wire rope will fail under a stationary load. Breaking strength is not considered safe working load (SWL) limit.

Loos Stainless Steel 302/304 Nylon Coated Wire Rope, 7x19 Strand Core, Red, 1/4" Bare OD, 5/16" Coated OD, 250' Length, 6400 lbs Breaking Strength Review

Upon first opening the box, I could tell this is a very well made product. The red color really pops and would be noticeable for any use outdoors or for running lines that people might otherwise not easily see. It's great that this is such a durable stainless steel cable but more so that is it coated to help resist corrosion.

My intended use for this wire was to hang a curtain across the middle of a room as a divider and it has worked perfectly for this. The outer coating is very durable and has held up well to the abuse of drawing the curtain across it daily. The price is also very reasonable for the 25 ft. length of this cable.

Overall I would recommend this cable for durability and the price for the length of wire received. It was actually rather difficult to find locally and I'm glad I was able to find it here on Amazon.

Most of the consumer Reviews tell that the "Loos Stainless Steel 302/304 Nylon Coated Wire Rope, 7x19 Strand Core, Red, 1/4" Bare OD, 5/16" Coated OD, 250' Length, 6400 lbs Breaking Strength" are high quality item. You can read each testimony from consumers to find out cons and pros from Loos Stainless Steel 302/304 Nylon Coated Wire Rope, 7x19 Strand Core, Red, 1/4" Bare OD, 5/16" Coated OD, 250' Length, 6400 lbs Breaking Strength ...

Alemite 7534-4 Dual Leverage Dispensers, Dual Leverage Dispenser, 16 gal, 1/2" NPTF Outlet

You looking to find the "Alemite 7534-4 Dual Leverage Dispensers, Dual Leverage Dispenser, 16 gal, 1/2" NPTF Outlet" Good news! You can purchase Alemite 7534-4 Dual Leverage Dispensers, Dual Leverage Dispenser, 16 gal, 1/2" NPTF Outlet with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $332.48    

Product Feature

• Drum Vol. - 16 gal
• Outlet Size - 1/2 in (NPTF)
• Designated Fluid - Petroleum
• Vol. @ No. of Strokes - 1 pt @ 6
• Mechanism - Piston

Product Description

025-7534-4 Features: -For fluid gear lubricants.-Attach directly onto original containers.-Vol. @ No. of Strokes: 1 pt @ 6.-Outlet Size: 1/2 in (NPTF).-Outlet Type: Hose/Tip.-Drive Type: Lever Action.-Mechanism: Piston.-Type: Barrel Pump.-Price is for 1 Each. Dimensions: -Hose Length: 5.5 ft.

Alemite 7534-4 Dual Leverage Dispensers, Dual Leverage Dispenser, 16 gal, 1/2" NPTF Outlet Review

Nice Replacement for our Shop! Can't go wrong with the Alemite brand!
Very pleased with our purchase. Might have to replace the rest in our shop with the brand!

Most of the consumer Reviews tell that the "Alemite 7534-4 Dual Leverage Dispensers, Dual Leverage Dispenser, 16 gal, 1/2" NPTF Outlet" are high quality item. You can read each testimony from consumers to find out cons and pros from Alemite 7534-4 Dual Leverage Dispensers, Dual Leverage Dispenser, 16 gal, 1/2" NPTF Outlet ...

Electrolux 4B-H803 Honeywell Quiet Pro Central Vacuum System Power Unit

You looking to find the "Electrolux 4B-H803 Honeywell Quiet Pro Central Vacuum System Power Unit" Good news! You can purchase Electrolux 4B-H803 Honeywell Quiet Pro Central Vacuum System Power Unit with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $544.34 $536.49   

Product Feature

• Heavy-duty steel body
• Ultra quiet performance
• Permanent self-cleaning HEPA filter
• Rated for up to a 12,000-square foot cleaning space
• Comes with a 5-year limited warranty

Product Description

The Honeywell 4B-H803 Quiet Pro Central Vacuum System Power Unit features a powerful 630-Air Watt, 120-Volt, 15-Amp Dual-stage motor delivering 135-Inches of suction power to Honeywell's central vacuum system. The Honeywell central vacuum system power unit features a durable steel construction with a motor protection system, a permanent self-cleaning HEPA triumph air filter, a 7-Gallon dirt receptacle with viewing window and a mounting bracket for easy and secure anchoring. The Honeywell motor delivers enough power to clean up to a 12,000 square foot space. While delivering heavy-duty power, the Honeywell unit's noise-reducing technology and re-designed muffler ensure exceptionally quiet operation. The Honeywell 4B-H803 Central Vacuum System Power Unit measures 14-Inches long by 14-Inches wide by 45-Inches high and carries a 5-Year limited warranty. Honeywell Central Vacuum systems represent the very best in design and manufacturing and offer a truly superior option to a traditional vacuum.

Electrolux 4B-H803 Honeywell Quiet Pro Central Vacuum System Power Unit Review

We installed the Honeywell Central Vacuum in a new house that we built. The 30" hose is easy to carry around and the vacuuming takes no time. The suction is great.

Most of the consumer Reviews tell that the "Electrolux 4B-H803 Honeywell Quiet Pro Central Vacuum System Power Unit" are high quality item. You can read each testimony from consumers to find out cons and pros from Electrolux 4B-H803 Honeywell Quiet Pro Central Vacuum System Power Unit ...