PC Products PC-11 Two-Part Marine Grade Epoxy Adhesive Paste, 10 gal in Two Pails, Off White

You looking to find the "PC Products PC-11 Two-Part Marine Grade Epoxy Adhesive Paste, 10 gal in Two Pails, Off White" Good news! You can purchase PC Products PC-11 Two-Part Marine Grade Epoxy Adhesive Paste, 10 gal in Two Pails, Off White with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $653.01    

Product Feature

• Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
• Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
• Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
• High-tack paste can be used in vertical and overhead applications
• Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water

Product Description

The PC Products PC-11 is a two-part marine epoxy adhesive paste used to bond materials in dry, wet, and underwater environments. The epoxy is made from a high-tack paste that fully cures even when submerged in water and can be used in vertical and overhead applications, as well as both indoors and outdoors. After maximum curing, the product has high strength and provides resistance to mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water. It can be painted, stained, and machined, and is nontoxic and nonconductive after it has been cured.

Specifications

Compatible materials	Fiberglass, concrete, many metals, glass, ceramic, and rubber
Application temperature range	35 to 115 degrees F
Service temperature range	-20 to +200 degrees F
Working time	30 to 40 minutes (at 70 degrees F)
Cure time for service	Overnight (dependent on temperature, humidity, and application size)
Maximum cure time	1 to 2 weeks(dependent on temperature, humidity, and application size)
Mix ratio	1:1

Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.

What's in the Box?

• 10 gal. PC-11 in two pails (5-gal. pail of Part A and 5-gal. pail of Part B)

PC Products PC-11 Two-Part Marine Grade Epoxy Adhesive Paste, 10 gal in Two Pails, Off White Review

This is amazing stuff. I don't have a boat or anything marine related but PC-11 has come in handy quite a bit over the years. I've used it to patch holes in porcelain, fiberglass, and metal and plastic pipes. Simple to use. Mix part A with an equal part of part B, apply to the hole/tear/problem area, and you're done. It hardens overnight but is tacky within a few hours and will stop a leak immediately. Absolutely essential to have on hand for fast plumbing fixes. On a fiberglass tub bottom a smoothed out blob of this has lasted literally, years. It's not a temporary fix.

One thing though, if you use your fingers to apply, (I use an old butter knife and mix A/B in small disposable containers), try to remember to wear gloves. It's a real pain to wash this off.

Most of the consumer Reviews tell that the "PC Products PC-11 Two-Part Marine Grade Epoxy Adhesive Paste, 10 gal in Two Pails, Off White" are high quality item. You can read each testimony from consumers to find out cons and pros from PC Products PC-11 Two-Part Marine Grade Epoxy Adhesive Paste, 10 gal in Two Pails, Off White ...