1.5m (5') Audioquest Diamond RJ/E (Ethernet) Cable

You looking to find the "1.5m (5') Audioquest Diamond RJ/E (Ethernet) Cable" Good news! You can purchase 1.5m (5') Audioquest Diamond RJ/E (Ethernet) Cable with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,194.75    

Product Feature

• Solid 100% PSS Silver
• Solid High-Density Polyethylene
• Black/Silver braid
• Precision made low-loss ultra-wide bandwidth connectors
• 100% shield coverage and strain relief termination

Product Description

In order to fabricate copper or silver into a strand or conductor, it is first cast and then drawn (squeezed through a die). Even finest high-purity metals have imperfections and grain structure, which due to the direction of casting and drawing become non-symmetrical structures without the conductor. In ways which are not fully understood, both analog and digital audio performance is significantly affected by these non-linearities. While AudioQuest doesn't pretend to fully understawnd this obvious distortion mechanicm, the solution is understood 100%. Use the conductors in the direction which reduces distoration!

1.5m (5') Audioquest Diamond RJ/E (Ethernet) Cable Review

I never noticed how much data my cheap Ethernet cords lost until I switched to this one.

All of those YouTube comments that look misspelled or like they're missing words? Actually a result of data lost in transmission. After switching to this cable, they turned into eloquent speeches.

It's a little expensive, but I'd never go back.

Most of the consumer Reviews tell that the "1.5m (5') Audioquest Diamond RJ/E (Ethernet) Cable" are high quality item. You can read each testimony from consumers to find out cons and pros from 1.5m (5') Audioquest Diamond RJ/E (Ethernet) Cable ...

Samco Scientific 691-1S Polyethylene 62uL Large Aperture General Purpose Transfer Pipette, with Bulb Draw of 4.8mL, Sterile, Individually Wrapped (Pack of 2000)

You looking to find the "Samco Scientific 691-1S Polyethylene 62uL Large Aperture General Purpose Transfer Pipette, with Bulb Draw of 4.8mL, Sterile, Individually Wrapped (Pack of 2000)" Good news! You can purchase Samco Scientific 691-1S Polyethylene 62uL Large Aperture General Purpose Transfer Pipette, with Bulb Draw of 4.8mL, Sterile, Individually Wrapped (Pack of 2000) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $482.85    

Product Feature

• Disposable polyethylene transfer pipets provide a 4.8ml bulb draw
• Overall capacity of 9.3ml with a length of 13.7cm
• Single-unit design features a narrow stem and a large bulb
• Can be frozen in liquid nitrogen or heat sealed for storage
• Sterile and individually packed

Product Description

These general purpose large aperture Samco Scientific disposable transfer pipets are made of shatterproof, nontoxic polyethylene. Sterile and individually packed, the single-unit design features a built-in pipet bulb that eliminates need for plugging, packaging, autoclaving and helps prevent cross-contamination. Their low-affinity surface reduces loss of cells and valuable proteins due to binding. They can also be frozen in liquid nitrogen or heat sealed for storage. Overall Capacity: 9.3ml. Bulb Draw: 4.8ml. Stem Diameter: 6.1mm. Length: 13.7cm. Samco Scientific #: 691-1S.

Samco Scientific 691-1S Polyethylene 62uL Large Aperture General Purpose Transfer Pipette, with Bulb Draw of 4.8mL, Sterile, Individually Wrapped (Pack of 2000) Review

These are non-graduated pipettes (no measure marks on the side) Made of thin plastic. Good for general use or crafts.

Most of the consumer Reviews tell that the "Samco Scientific 691-1S Polyethylene 62uL Large Aperture General Purpose Transfer Pipette, with Bulb Draw of 4.8mL, Sterile, Individually Wrapped (Pack of 2000)" are high quality item. You can read each testimony from consumers to find out cons and pros from Samco Scientific 691-1S Polyethylene 62uL Large Aperture General Purpose Transfer Pipette, with Bulb Draw of 4.8mL, Sterile, Individually Wrapped (Pack of 2000) ...

Apollo 61-100 Series Bronze Check Valve, Ball Cone, 3" NPT Female

You looking to find the "Apollo 61-100 Series Bronze Check Valve, Ball Cone, 3" NPT Female" Good news! You can purchase Apollo 61-100 Series Bronze Check Valve, Ball Cone, 3" NPT Female with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $531.59    

Product Feature

• Ball cone check valve restricts flow to one direction, blocking reverse flow
• Valve body made of ASTM B-584 bronze for strength and corrosion resistance
• 400 pounds per square inch (gauge) (psig) rating for cold working pressure (CWP) and 125 for steam working pressure (SWP)
• Cracking pressure of 0.5 pounds psi
• Female National Pipe Taper (NPT) threads on both ends for connecting to male threaded pipes

Product Description

The Apollo 61-100 series bronze ball cone check valve with female National Pipe Taper (NPT) threads on both ends is a class 125 valve used for restricting flow to one direction. It has a spring-loaded ball cone that sits against the seat of the valve to block reverse flow. The check valve's body is made of American Society of Testing and Materials (ASTM) B-584 bronze for strength and corrosion resistance. This valve has maximum pressure ratings of 400 pounds per square inch (gauge) (psig) for cold working pressure (CWP)and 125 psig for steam working pressure (SWP), and a cracking pressure of 0.5 pounds psi. It has female NPT threads on both ends for connecting to male threaded pipes with tighter seals than straight threads. This class 125 check valve is for use in water lines, processing plants, and agricultural applications and meets standard Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.

Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.

Apollo 61-100 Series Bronze Check Valve, Ball Cone, 3" NPT Female Review

This unit is well built and works very well. It does not leak a bit of air. I use it on my big shop compressor. I pump it to 175psi. The valve raises to 150F degrees while in operation with out any problem.

Most of the consumer Reviews tell that the "Apollo 61-100 Series Bronze Check Valve, Ball Cone, 3" NPT Female" are high quality item. You can read each testimony from consumers to find out cons and pros from Apollo 61-100 Series Bronze Check Valve, Ball Cone, 3" NPT Female ...

Invacare Lift Reliant Sit To Stand - Model rps350-1

You looking to find the "Invacare Lift Reliant Sit To Stand - Model rps350-1" Good news! You can purchase Invacare Lift Reliant Sit To Stand - Model rps350-1 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $3,073.16 $3,067.20   

Product Feature

• Invacare Lift Reliant Sit To Stand - Model rps350-1
• Manufacturer: Invacare - Model rps350-1
• Category: patient room furniture
• This item is sold by the each.

Product Description

Invacare Lift Reliant Sit To Stand - Model rps350-1

Invacare Lift Reliant Sit To Stand - Model rps350-1 Review

This lift permitted my wife to come home from a nursing home, but is less than ideal. A major problem is related to the lack of use of her arms due to a serious stroke. The lift is designed ideally for someone who can grab the lift bars with both hands to reduce stress and strain on underarms. Without this ability, much of her weight (perhaps 60% or 70%) is suspended by her arm pits. This is uncomfortable and leads to her arms being dramatically splayed out, threatening to rip her arms out of her shoulder sockets. I developed a 6' Velcro strap that holds her elbows in at her side to avoid the most serious discomfort, but even with the strap the sling rides up toward her neck, causing significant discomfort roughly half the time.
The other problem with the Reliant 350 is the quality of construction, which is the major reason for not giving the lift 4 stars. We have owned the lift for about 2 and a half years. In that time both major locking casters have failed twice, the lift actuator (drive motor) has failed once, and the up/down remote switch has failed twice. Repairs have cost us about $1,500. And we have been seriously inconvenienced by a couple of these failures. We have used the RPS 350-1 as a rental loaner, and it is essentially the same as the one we own.
We have tried the Liko Sabina 2 lift. It seems better made, but it has the same problem related to lack of arm capability, even with their comfort sling, and it is more expensive. A hoyer lift is more comfortable, but transferring and toileting at home is much more of a problem with this lift.
Our bottom line: It's better than being in a nursing home.

Most of the consumer Reviews tell that the "Invacare Lift Reliant Sit To Stand - Model rps350-1" are high quality item. You can read each testimony from consumers to find out cons and pros from Invacare Lift Reliant Sit To Stand - Model rps350-1 ...

Ingersoll-Rand C400H 3/4-1-3/4t 20'/10'lift Aluminum Cable Pulley

You looking to find the "Ingersoll-Rand C400H 3/4-1-3/4t 20'/10'lift Aluminum Cable Pulley" Good news! You can purchase Ingersoll-Rand C400H 3/4-1-3/4t 20'/10'lift Aluminum Cable Pulley with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $329.14 $313.71   

Product Feature

• Head Room - 17 in
• Cable/Wire Size - 1/4 in
• Type - Cable Puller
• Operating Type - Ratchet
• Wt. Cap. - 3400 lb

Product Description

C-Series Wire Pullers

Ingersoll-Rand C400H 3/4-1-3/4t 20'/10'lift Aluminum Cable Pulley Review

This puller is the best that you can get for the money. The longer cable and easy to use release mechanism were also key to the decision.

The only thing I could ask for would be a larger unit with a longer cable and heavier load capacity.

Most of the consumer Reviews tell that the "Ingersoll-Rand C400H 3/4-1-3/4t 20'/10'lift Aluminum Cable Pulley" are high quality item. You can read each testimony from consumers to find out cons and pros from Ingersoll-Rand C400H 3/4-1-3/4t 20'/10'lift Aluminum Cable Pulley ...

StorageTek 313602501 STORAGTEK 40/80GB DLT8000 HVD MODULE FOR L180/L700 LIBRARY, Refurb

You looking to find the "StorageTek 313602501 STORAGTEK 40/80GB DLT8000 HVD MODULE FOR L180/L700 LIBRARY, Refurb" Good news! You can purchase StorageTek 313602501 STORAGTEK 40/80GB DLT8000 HVD MODULE FOR L180/L700 LIBRARY, Refurb with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

   

Product Description

Storagetek 313602501 Storagtek 40/80GB DLT8000 HVD Loader Ready Product Details: - Manufacturer: Storagetek - Item Condition: Refurbished to Manufacturer Specifications - Part Number: 313602501 - Product Type: Tape Drives - Technology Category: DLT - Recording Format: DLT8000 - Capacity: 40/80 GB - Interface: SCSI HVD - Form Factor: Loader Ready - 5.25" FH - Sanworks SKU#: SWN005812 - Additional Product Info: Please call Sanworks for specification or compatibility questions. Product Highlights: - 90 Days Unlimited Warranty - Extended Warranty Available - One Year Product Support with Sanworks Included - 100% Satisfaction or Your Money Back - In Stock

StorageTek 313602501 STORAGTEK 40/80GB DLT8000 HVD MODULE FOR L180/L700 LIBRARY, Refurb Review

THEY WERE EASY TO WORK WITH AND THE ITEM WAS AS ADVERTISED. WOULD USE AGAIN. EASY TO RESOLVE ANY QUESTIONS WITH.

Most of the consumer Reviews tell that the "StorageTek 313602501 STORAGTEK 40/80GB DLT8000 HVD MODULE FOR L180/L700 LIBRARY, Refurb" are high quality item. You can read each testimony from consumers to find out cons and pros from StorageTek 313602501 STORAGTEK 40/80GB DLT8000 HVD MODULE FOR L180/L700 LIBRARY, Refurb ...

260 Brass Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B36, 0.5" Thickness, 12" Width, 12" Length

You looking to find the "260 Brass Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B36, 0.5" Thickness, 12" Width, 12" Length" Good news! You can purchase 260 Brass Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B36, 0.5" Thickness, 12" Width, 12" Length with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $346.80    

Product Feature

• 260 brass, also known as yellow brass or cartridge brass, is corrosion resistant and has high formability
• Meets ASTM B36 specifications
• Unpolished (mill) surface has no finish
• H02 temper has been cold worked to a 1/2 hard temper
• Standard tolerance

Product Description

The 260 brass sheet with H02 temper is unpolished, meets American Society for Testing and Materials International ASTM B36 specifications, and has a standard tolerance. The 260 brass alloy, also known as yellow brass and cartridge brass, is corrosion resistant and has high formability due to its zinc content. The material has an H02 temper, meaning it has been cold worked to a 1/2 hard temper.

Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Copper, a term that applies to alloys containing at least 99.3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. It provides greater strength and better machinability than copper or bronze. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness.

Tensile strength, used to indicate the material's overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

260 Brass Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B36, 0.5" Thickness, 12" Width, 12" Length Review

My kids were asking why our apartment doesn't have its own brass sign outside unlike all the other apartments. We live in San Francisco's trendy South of Market district, where brass signs have become de rigueur in recent years. Signs with butterflies embossed on them that say "The Nabokovs." Signs with monocles engraved that read "Peter and Harriet." The lot. Yes, I know what it's like to be a kid and to be ashamed of one's parents for not providing one's family with something it seems all the other kids have. And so, when I noticed that they were crying themselves to sleep over this issue, and that in the morning their pillowcases were wet with tears, I resolved to do something about it, so I ordered a few ultra slim 260 H02 sheets of brass from Amazon and decided to make myself a sign for "The Killians."

These brass sheets, less than .02 inches thick, are flexible enough for you, or your child, to wrap around a pole, massage into desired thickness, test for bugs, in any dimension you like. My kids wanted to paper the lintel with brass, and I let 'em. Might be hot on summer afternoons, but they'll learn. In the meantime you can hammer out the font characters you want, plus some amusing design (we had tulips) cut to 36" x 12" so you will have a nice plaque right next to your doorbell. Or should you discover someone famous once lived in your building, and your HOA approves, you could whip up a sign to commemorate the achievement right away. Like we discovered that Samuel Delany and Marilyn Hacker once lived in our building and staged a production of Genet's THE MAIDS on the three-flight stairwell, so that spectators stood on the street and craned their necks up to see the fun. Blam! Another brass sign. At this price you'll be buying brass like there's no tomorrow.

Most of the consumer Reviews tell that the "260 Brass Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B36, 0.5" Thickness, 12" Width, 12" Length" are high quality item. You can read each testimony from consumers to find out cons and pros from 260 Brass Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B36, 0.5" Thickness, 12" Width, 12" Length ...