T-MAX 47-1695 EW9500 12-Volt Outback Series 9500lb Winch with Radio Control and Torque Limiter

You looking to find the "T-MAX 47-1695 EW9500 12-Volt Outback Series 9500lb Winch with Radio Control and Torque Limiter" Good news! You can purchase T-MAX 47-1695 EW9500 12-Volt Outback Series 9500lb Winch with Radio Control and Torque Limiter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $653.12 $541.33   

Product Feature

• Recovers the stuck vehicle
• Has 12-Volt motor with line pull rate of 9500 lb and 5.5 hp
• Includes 12-inch lead motor remote switch
• Consists of radio control, torque limiter, 3-stage planetary gear train and off-road wire rope
• Features 12 months warranty for electrical parts and lifetime warranty for mechanical components

Product Description

T-MAX 12-Volt Outback Series Winch with Radio Control and Torque Limiter is designed to recover stuck vehicle. This winch features 12-volt motor with line pull rate of 9500 lb and 5.5 horsepower. It consists of 12-inch lead motor remote switch to facilitate operating the winch from distance. This winch includes 3-stage planetary gear train, radio control, torque limiter and off-road wire rope. The mechanical components of the winch are backed by limited lifetime warranty and the electrical parts are backed by 12 month warranty.

T-MAX 47-1695 EW9500 12-Volt Outback Series 9500lb Winch with Radio Control and Torque Limiter Review

Let me start by saying that I have always been a fan of Warn. My first winch (13 years ago) was an M8000, I put that thing through its paces for several years until I wold the truck and the winch. This year I put together a new truck, and began doing my research, at first I was inclined to go with what I had already had in the past, since it never let me down, but the Winch market has grown so much the past years and gotten so diverse that in my opinion, there is no saying which one is the Best..... the best winch is going to be the one that best suits You for Your application.. I had set my Winch budget to $800, and that is where my search began. I liked that T-Max is an Australian brand, and when I compared the spec sheets on the T-Max winch and compared to the competition, It was pretty obvious to me that I was getting alot more Winch for the money when going with the T-Max, the wireless remote makes for very safe use and works perfect, the Torque limiter protects the winch from serious damage, and so far this thing has pulled me through everything and anything without a hiccup. I use this in 100 degree weather and have had no overheating problems with it, Ive also used it under water and it performed with no problems, the test of time will tell how awesome this Winch really is, but so far... Ive had 0 problems and no regrets going with the T-Max instead of the W.

Most of the consumer Reviews tell that the "T-MAX 47-1695 EW9500 12-Volt Outback Series 9500lb Winch with Radio Control and Torque Limiter" are high quality item. You can read each testimony from consumers to find out cons and pros from T-MAX 47-1695 EW9500 12-Volt Outback Series 9500lb Winch with Radio Control and Torque Limiter ...

Global Glove TAK515-D2-S Two Sided Dotted Glove, Cut Resistant, Small, Yellow (Case of 72)

You looking to find the "Global Glove TAK515-D2-S Two Sided Dotted Glove, Cut Resistant, Small, Yellow (Case of 72)" Good news! You can purchase Global Glove TAK515-D2-S Two Sided Dotted Glove, Cut Resistant, Small, Yellow (Case of 72) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $336.43    

Product Feature

• High level cut resistant hand protection
• Double dotted palm
• Reinforced thumb crotch
• Level 4 ASTM cut protection
• Size: small

Product Description

Global Glove Taeki 5 technology uses a revolutionary duracore spinning process and an innovation silicon reinforced fiber. The technology advancements in our engineered yarn bring you the exceptionally high cut resistance without sacrificing dexterity and tactile sensitivity. Yellow color with two sides dotted and reinforced thumb crotch for extra protection and wear. Level 4 ASTM cut protection. Comparable heat qualities to aramid/kevlar. Can also be bleached and will not degrade in sunlight. Used wherever material handling of sharp objects such as glass, sheet metal or razor sharp steel as well as where grip and dexterity is a key issue. Small size.

Global Glove TAK515-D2-S Two Sided Dotted Glove, Cut Resistant, Small, Yellow (Case of 72) Review

Highly reputable company supplying great cut resistance gloves, one of my personal favorite cut resistace glove, perfect fitting, good grip and high standards of cut resistance.

Most of the consumer Reviews tell that the "Global Glove TAK515-D2-S Two Sided Dotted Glove, Cut Resistant, Small, Yellow (Case of 72)" are high quality item. You can read each testimony from consumers to find out cons and pros from Global Glove TAK515-D2-S Two Sided Dotted Glove, Cut Resistant, Small, Yellow (Case of 72) ...

PEI (Polyetherimide) Sheet, Opaque Off-White, 1" Thickness, 12" Width, 24" Length (Pack of 1)

You looking to find the "PEI (Polyetherimide) Sheet, Opaque Off-White, 1" Thickness, 12" Width, 24" Length (Pack of 1)" Good news! You can purchase PEI (Polyetherimide) Sheet, Opaque Off-White, 1" Thickness, 12" Width, 24" Length (Pack of 1) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $805.57    

Product Feature

• PEI will withstand continuous temperature of 390 F under load.
• Is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors
• PEI has found use in the Medical Device Market because of its heat and radiation resistance
• It is prone to stress cracking in chlorinated solvents.
• It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents.

Product Description

Glass Filled Ultem 1000 (PEI) is an amorphous thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. Glass filled PEI is higher strength than the unfilled version. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates.

PEI (Polyetherimide) Sheet, Opaque Off-White, 1" Thickness, 12" Width, 24" Length (Pack of 1) Review

good for rep rap 3D printing as "no warping" printing desk, mounted on heatbed.
No longer kapton Tape wasting, no more aceton-abs souce on glas...

Most of the consumer Reviews tell that the "PEI (Polyetherimide) Sheet, Opaque Off-White, 1" Thickness, 12" Width, 24" Length (Pack of 1)" are high quality item. You can read each testimony from consumers to find out cons and pros from PEI (Polyetherimide) Sheet, Opaque Off-White, 1" Thickness, 12" Width, 24" Length (Pack of 1) ...

Black & Decker/Dewalt Dwd215g Drill, Variable-Speed Reversing, Mid-Level Handle, With 1/2-In. Keyless Chuck - Quantity 5 1/2" Corded Drill

You looking to find the "Black & Decker/Dewalt Dwd215g Drill, Variable-Speed Reversing, Mid-Level Handle, With 1/2-In. Keyless Chuck - Quantity 5 1/2" Corded Drill" Good news! You can purchase Black & Decker/Dewalt Dwd215g Drill, Variable-Speed Reversing, Mid-Level Handle, With 1/2-In. Keyless Chuck - Quantity 5 1/2" Corded Drill with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $750.00    

Product Description

1/2", Variable Speed Reversing Heavy Duty, Mid-Handle Grip Drill, With Keyless Chuck, 10A Motor Delivers Increased Drilling Performance, 1/2" All Metal Single Sleeve, Ratcheting Keyless Chuck With Automatic Spindle Lock Provides Greater Bit Retention & Tool Free Convenience, Mid-Handle Grip Design With Soft Grip Provides Increased Balance & Comfort, 01200 RPM, Variable Speed Reversing Switch For Increased Versatility, Includes 360 Degree Locking Side Handle With Soft Grip.

Black & Decker/Dewalt Dwd215g Drill, Variable-Speed Reversing, Mid-Level Handle, With 1/2-In. Keyless Chuck - Quantity 5 1/2" Corded Drill Review

I've had a Milwaukee 18V cordless drill for years (Lok-Tor serie, not the new Chinese made M18 cordless serie) and it's served me well. However batteries for these are unreliable and the Li-ion replacements cost too much (still had to buy a set to revive my cordless tools, cost is close to $200) so I decided to look for a corded alternative to take its place whenever possible. After HOURS of reading reviews and specs, I decided to go for this Dewalt one. It has power, speed and other features that I really like. My brand of choice is Milwaukee in the past but Milwaukee has decided to make most of their tools in China now and I'm definitely NOT a fan of Chinese products. I've had bad experiences with Dewalt brand in the past (10+ years ago) but thought they probably have improved. Not so.

Pros:
1. Decent price.
2. NOT "Made in China" craps. This is made in Mexico.
3. LOTS of power (10 AMP). In fact, it is the most powerful drill in its class.
4. Mid-section handle gives a balanced hold.
5. SPINDLE LOCK!!! Can't stress how important this is on keyless chucks. You can tighten bits a lot tighter than free-spinning spindle, which requires 2 hands to tighten bits. Very helpful when drilling large holes with round-shanked bits because the chuck clamps on the bits a lot tighter hence, eliminate bit spinning. For people who has never used a spindle-lock corded drill before: it's like the chuck tightening system found on most mid-range to high end cordless drill or corded drills with single sleeve chucks. Trust me, you won't want to go back to drills without spindle lock after using one.
6. High RPM for 1/2" drill. Most 1/2" drill goes for around 850RPM spindle speed. This one goes to 1200RPM. This is great for drilling small holes (faster, requires less push-down force).(Some hammer drills can go as fast as 3000RPM free spinning but they're of a different class, for different purpose.)
7. Nice LFA single-sleeved keyless chuck with brazed-on CARBIDE jaw liners. It will last a long time, even when your bit spins in it often.

Now the CONS:

1. Biggest draw-back for me is the concentricity of the spindle. I've used LFA chucks and know that they're very good chucks so that eliminates the question about the chuck's concentricity. A test piece of 1/4 diameter X 6" long ground Thompson shaft wobbled a lot at the end when spun in this drill. Estimated about 0.020"-0.050" run-out on it. Naturally, I brought back to to local store where I bought it to exchange for a better one. Tested the new one at the exchange counter to make sure and it did EXACTLY the same. Went and grabbed another one, same thing. They had only 3 in stock so I got a refund to go to another store in hope to get a better one. The clerk thought drills were meant to be like that so I brought in my 1/2" Milwaukee 18V Lok-Tor drill (German made) and chucked the shaft into it. It ran extremely straight with no run-out detectable by eyes or finger placing at the end of the shaft. He just shook his head in disbelief. Tested 3 more drills at a different store and the exact same thing happened. Got really pissed because I really liked the "Pros" mentioned above. I assemble machines together and precision drilling is a must so a wobbling chuck won't do it for me. It makes the drill "walks" out of a center-punched mark easily and makes a tap-drilled hole a lot bigger than anticipated (which results in very shallow thread depth or you can't tap it at all).

2. Close examination of the chuck mounting system revealed another short-cut adopted by Dewalt: there is NO chuck screw to hold the chuck in place. Not even a tapped hole for the screw. In place of this hole is just a center-drilled mark. This is normally a left-hand screw to hold the chuck in place when you're running it in counter-clockwise rotation. It prevents the chuck from being unwound out of the spindle in reverse when a lot of torque is applied to the chuck in that direction. If you ever need to drill a large hole into metal (5/8" and larger) and the bit binds when it exits the hole, this whole chuck+bit may just unwind from the spindle when you put it in reverse in an attempt to take the bit out of the hole. This is NOT a good thing.

The CONS are deal-breakers for me. I'm sure a lot of people will find that negligible. If that is the case, by all means, buy this drill. It seems to be very good build, very powerful drill and will last for years to come. It's just not what I needed from a high-end drill. Ended up buying a used 7 AMP Chinese-made Milwaukee 3/8" drill from Amazon Warehouse. This drill has 1/2"-20 spindle thread so I just needed to buy a new 1/2" LFA chuck with carbide jaws to replace the OEM one. Everything is well. Chuck runs extremely true (thank God). I do wish Milwaukee (or any other brand, for that matter) makes a corded drill that has ALL the features of a high-end cordless drill (spindle lock, adjustable clutch, 2 speed selector switch, electric brake...). So far, only Ryobi makes one with a clutch (not a very good clutch at all, lowest setting is still too stiff). I'd like to see other better brands jumps on this wagon and I'm willing to pay extra for those features. Hope you find this lengthy review helpful.

Most of the consumer Reviews tell that the "Black & Decker/Dewalt Dwd215g Drill, Variable-Speed Reversing, Mid-Level Handle, With 1/2-In. Keyless Chuck - Quantity 5 1/2" Corded Drill" are high quality item. You can read each testimony from consumers to find out cons and pros from Black & Decker/Dewalt Dwd215g Drill, Variable-Speed Reversing, Mid-Level Handle, With 1/2-In. Keyless Chuck - Quantity 5 1/2" Corded Drill ...

Makita Usa Gv5010 Vertical Sander, 3.9-Amp, 5-In. - Quantity 5 Finish & Palm Sander

You looking to find the "Makita Usa Gv5010 Vertical Sander, 3.9-Amp, 5-In. - Quantity 5 Finish & Palm Sander" Good news! You can purchase Makita Usa Gv5010 Vertical Sander, 3.9-Amp, 5-In. - Quantity 5 Finish & Palm Sander with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $504.65    

Product Description

5" Vertical Sander, 3.9AMP, Weighs 2.4 lbs. Powerful Motor For Maximum Sanding. Double Insulated. Rubberized Soft Grip. Includes #80 Grit Abrasive Disc, Plastic Pad, Side Handle & Hex Wrench.

Makita Usa Gv5010 Vertical Sander, 3.9-Amp, 5-In. - Quantity 5 Finish & Palm Sander Review

I purchased this disc sander to strip an older home of about 50 years of paint. It performed flawlessly. The light weight and trigger lock made it very comfortable to use overhead on the tongue & groove soffit. The unit was operated for many hours in 100+ degree weather, subjected to copious amounts of dust and debris, and shows no signs of slowing down. The rubber inserts also make for comfortable use.

I did want to point out another option to the sanding discs. What I learned from a contractor many years ago was to just purchase a roll of sandpaper used for floor sanding machines. I bought a roll of 8" X 50yds sandpaper and used a lid to mark and cut out the discs myself. Not only was this enough to do the entire house, but it also took care of the sanding blocks. I've still got some left. Just spray the discs with a pressure sensitive adhesive, wait a minute and pop them onto the sander.

Most of the consumer Reviews tell that the "Makita Usa Gv5010 Vertical Sander, 3.9-Amp, 5-In. - Quantity 5 Finish & Palm Sander" are high quality item. You can read each testimony from consumers to find out cons and pros from Makita Usa Gv5010 Vertical Sander, 3.9-Amp, 5-In. - Quantity 5 Finish & Palm Sander ...

CRL Brushed Copper 90° "Sleeve Over" Glass Clamp

You looking to find the "CRL Brushed Copper 90° "Sleeve Over" Glass Clamp" Good news! You can purchase CRL Brushed Copper 90° "Sleeve Over" Glass Clamp with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $314.75    

Product Feature

• For 5/16" to 1/2" (8 to 12 mm) Thick Glass
• Solid Brass
• Assists With Shear Forces
• Holds Glass Panels in Position While Sealant Cures

Product Description

For 5/16" to 1/2" (8 to 12 mm) Thick Glass Solid Brass CRL 90 Degree Sleeve Over Glass Clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the two glass panels in a 90 degee position while silicone applied silicone in the joint cures. Color: Brushed Copper Width Per Leg: 2-1/16 in (52.4 mm) Height: 1 in (25.4 mm) Minimum Order: 1 Each Additional Product Information: SPECIFICATIONS: Glass Thickness: 5/16 to 1/2 inch (8 to 12 millimeter) Tempered Safety Glass Construction: Solid Brass No Fabrication Required: (Clamps tighten using nylon tipped Allen screws) Includes: Gaskets

CRL Brushed Copper 90° "Sleeve Over" Glass Clamp Review

Verry nice bracket made of fine quality material and looks great installed. Adds strength and security to the shower return.

Most of the consumer Reviews tell that the "CRL Brushed Copper 90° "Sleeve Over" Glass Clamp" are high quality item. You can read each testimony from consumers to find out cons and pros from CRL Brushed Copper 90° "Sleeve Over" Glass Clamp ...

Condenser Fan Motor 6 1/2" Diameter 1 hp, 850 RPM 460/200-230 Volts Three Phase AO Smith # H686

You looking to find the "Condenser Fan Motor 6 1/2" Diameter 1 hp, 850 RPM 460/200-230 Volts Three Phase AO Smith # H686" Good news! You can purchase Condenser Fan Motor 6 1/2" Diameter 1 hp, 850 RPM 460/200-230 Volts Three Phase AO Smith # H686 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $348.95    

Product Feature

• 2.0/4.4-4.0 amps; 460/200-230 Volts
• Open Shaft End; Shaft 5/8" x 4.88"
• Motor Case Length 9.36"
• Air Over
• 1 Year Manufacture Warranty

Condenser Fan Motor 6 1/2" Diameter 1 hp, 850 RPM 460/200-230 Volts Three Phase AO Smith # H686 Review

Delivery was when I was ready for the project, motor went right in. Had very little modifications I had to do to my hardware, which was I had suspected. Running smooth.

Most of the consumer Reviews tell that the "Condenser Fan Motor 6 1/2" Diameter 1 hp, 850 RPM 460/200-230 Volts Three Phase AO Smith # H686" are high quality item. You can read each testimony from consumers to find out cons and pros from Condenser Fan Motor 6 1/2" Diameter 1 hp, 850 RPM 460/200-230 Volts Three Phase AO Smith # H686 ...