Clear Blue Digi 2.0 LED High Power Curing Light

You looking to find the "Clear Blue Digi 2.0 LED High Power Curing Light" Good news! You can purchase Clear Blue Digi 2.0 LED High Power Curing Light with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $325.00    

Product Feature

• High power 1,200 mW/cm2 for fast cures
• Emits light in the most relevant spectrum of 430-480nm wavelength to efficiently solidify any brand of resin
• Super-compact, lightweight, and cordless for the ultimate in convenience
• Cool and silent; no fan necessary as with halogen lamps
• Li-Ion battery with super capacity and no memory effect

Product Description

Clear Blue LED Curing LightProduct Features and Benefits:, High power 1,200 mW/cm2 for fast cures, Emits light in the most relevant spectrum of 430-480nm wavelength to efficiently solidify any brand of resin, Three working modes and exposure times for any clinical protocol, Super-compact, lightweight, and cordless for the ultimate in convenience, Cool and silent; no fan necessary as with halogen lamps, Li-Ion battery with super capacity and no memory effect

Clear Blue Digi 2.0 LED High Power Curing Light Review

Since 1980 I have owned halogen lights for curing composites. I tried the newer LED lights several years ago, spending roughly $1000 for a Demetron cordless LED light. The thing never worked right and I had to continue to use my corded Demetron halogen unit for years. When I finally decided to "cut the cord" again, there was no way that I was paying that much. I saw some reviews on the internet re: this unit and I purchased it... It works! I have just ordered two extra tips for a total of $100. In time, I guess that I will need to replace the battery, but I hear that while that order is being fulfilled, I can use the cord from the charger to directly plug into the unit. It seems to have different modes, but that doesn't really interest me. I just want something that is handy and works. So far, this one is doing the trick. If it lasts a few years (4?), I would repurchase it. The manufacturer says to autoclave the tips. So far, I have just been using cavicide to disinfect. The clear tip seems to be coated with a rubbery substance. the new ones I ordered are black with a clear end. I did like the glass finish on the Demetron tips better. I may begin to autoclave the tips. I just don't know how to measure the degradation. That is why I have not up until now.

Most of the consumer Reviews tell that the "Clear Blue Digi 2.0 LED High Power Curing Light" are high quality item. You can read each testimony from consumers to find out cons and pros from Clear Blue Digi 2.0 LED High Power Curing Light ...

Hilti TE50 1-3/4 in. Deluxe Combi Hammer

You looking to find the "Hilti TE50 1-3/4 in. Deluxe Combi Hammer" Good news! You can purchase Hilti TE50 1-3/4 in. Deluxe Combi Hammer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

   

Product Feature

• Powerful 9.1 amp, 1,050-watt motor
• Delivers up to 3,180 BPM and 550 RPM
• 1-3/4 in. chuck accepts TE-YX SDS Max bits (not included)

Product Description

Includes tool, 13 ft supply cord, side handle, Hilti grease, cleaning cloth, and operating instructions in an impact-resistant plastic tool box.The Hilti TE 50 Deluxe 1-3/4 in. Combo Hammer is durably made from robust components and features a powerful 9.1 amp, 1,050-watt motor that drives up to 3,180 BPM and 550 RPM, making it ideal for drilling and moderate chiseling in a number of materials. This hammer drill cools efficiently and has a high power-to-weight ratio to help increase job-site productivity. The tool's 1-3/4 in. chuck accepts TE-YX SDS Max bits (not included), and it comes supplied with a case for added value and convenience.

Hilti TE50 1-3/4 in. Deluxe Combi Hammer Review

The TE50 can handle any job. It drills through concrete with ease. The harder you push, the quicker it drills. The weight assists in drilling downwards. Excellent quality. Great price.

Most of the consumer Reviews tell that the "Hilti TE50 1-3/4 in. Deluxe Combi Hammer" are high quality item. You can read each testimony from consumers to find out cons and pros from Hilti TE50 1-3/4 in. Deluxe Combi Hammer ...

Panasonic EY6506NQKW 12-Volt NiMH Cordless Impact Driver

You looking to find the "Panasonic EY6506NQKW 12-Volt NiMH Cordless Impact Driver" Good news! You can purchase Panasonic EY6506NQKW 12-Volt NiMH Cordless Impact Driver with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $327.42    

Product Feature

• 12-volt cordless impact driver designed for professional applications
• Compact but powerful design; 867 inch/pounds of torque
• Light weight design for easier, safer use
• High-capacity 3.0Ah Ni-MH battery; 45-minute charging system
• 6-1/8 inches long; 3.2 pounds; 1-year warranty

Product Description

Includes 12 Volt 3.0Ah Ni-MH Cordless Impact Driver - EY6506NQKW-R, (2) High Capacity 3Ah Ni-MH Battery Packs

Panasonic EY6506NQKW 12-Volt NiMH Cordless Impact Driver Review

Big fan of panasonic cordless tools.. this is my 3rd. I was having a problem countersinking big screws into hardwood or cement board so based on some advice picked up this tool.. It took over where my very powerful 15.6 left off.. taking 3" screws that were stripped and wouldn't go in and countersinking them no problemo... the impact nature makes it less likely to break screws like the 15.6 does occasionally... I actually put a 3" screw about 1" countersunk into a FIR stud just testing out the capabilities. Quite literally it will keep driving most screws 'til you let go of the trigger, so better use a dimple bit on softer material.caveat: i had a few minutes of buyers remorse when i first used it as it is QUITE loud.. make no mistake when this is working your house is 'under construction'.. however you do get quite used to it, it's definiately worse as a bystander. I would rate it 4 1/2 stars for the one major problem: non standard chuck... argh on panasonic.. why why why? the solution to fix it is to put a slug of 1/4 hex cut off an old bit shank into the chuck or perhaps a couple #4 hex nuts (if that's what is 1/4"). .makes for easier removal if necessary... anyhow they did it so the double-headed bit that comes with fits nicer but makes NORMAL quick bits jam... and i have yet to find any bits whatsover including from panasonic that match the groove for the double headed quick bit that comes with.The charger that comes with is awesome because it works up to 18V batts... i can bring one charger and all my tools someplace and can charge my drill, my impact or my saw no need for 3 chargers. Until the torque load gets high enough it operates just like a drill, so small bits and small screws work great just like your drill and pretty much silent. I'm thrilled with the driver it's possibly my favorite tool.. too bad it needs a hack to fix it, but with the fix it's flawless. Help other customers find the most helpful reviews  Was this review helpful to you? Yes No Report abuse | PermalinkComment Comment

Most of the consumer Reviews tell that the "Panasonic EY6506NQKW 12-Volt NiMH Cordless Impact Driver" are high quality item. You can read each testimony from consumers to find out cons and pros from Panasonic EY6506NQKW 12-Volt NiMH Cordless Impact Driver ...

Ready Welder RWII #10250 MIG Welders with a MIG Spool Gun for running off Miller, Lincoln, Hobart, and Esab machines.

You looking to find the "Ready Welder RWII #10250 MIG Welders with a MIG Spool Gun for running off Miller, Lincoln, Hobart, and Esab machines." Good news! You can purchase Ready Welder RWII #10250 MIG Welders with a MIG Spool Gun for running off Miller, Lincoln, Hobart, and Esab machines. with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $639.00    

Product Feature

• Welds Steel, Stainless and Aluminum or Any Metals Where Standard
• Connects to other MIG/Constant Voltage, Stick/Constant Current Welding Machines
• Uses Wire Sizes from .023 to .045 without Changing Rollers
• Uses Heavy-Duty TWECO Quality Front End Consumables
• Wire Speeds of 50 Inches to 900 Inches per Minute

Product Description

The RWII Model #10250 is most frequesntly used by welders and welding facilities wanting a MIG Spool Gun attachment to run off their Miller, Lincoln, Hobart, and Esab machines. This model is an excellent choice for welders that have engine drivers or those that weld aluminum in the shop connected to a MIG os Stock machine. The Model #10250 is about 1/3 of the cost of most other manufacturer's spool guns. Most of these machines already have a ground cable built into them, therefore no ground cable is supplied. The Model# 10250 can run off of batteries by the user supplying the ground cable and the series cable for the batterries. This model also includes our AC/DC Power Converter to supply 24VDC when hooked up to CC (Constant Current) stick welding machines. The Model #10250 has a one year 100% parts and labor factory warranty.Model 10250 Features:* Cabled as a spoolgun attachment for all DC output welders * Welds Steel, Stainless and Aluminum or Any Metals Where Standard* One or Two Pound Spools are Available* Connects to Batteries- 18 Volt Battery can do Thin Sheet Metal- 24 Volt will Single Pass 1/2" @220 amp- 36 Volt will Weld up to 3/4" @ up to 350 amp* Welds 22 Gage to 3/4"* Ground Cable not supplied * Connects to other MIG/Constant Voltage, Stick/Constant Current Welding Machines* Uses Wire Sizes from .023 to .045 without Changing Rollers* Uses Heavy-Duty TWECO Quality Front End Consumables* Wire Speeds of 50 Inches to 900 Inches per Minute* Polarity Indicator Lights* Twenty Foot Cable with Quick Disconnects, Can be* Extended to 100 Feet* Built-in Gas Valve

Ready Welder RWII #10250 MIG Welders with a MIG Spool Gun for running off Miller, Lincoln, Hobart, and Esab machines. Review

Very nice to have the continuous amperage and wire feed.
This welder is a complete starter package.It is very small and exquisite.
The Model #10250 is about 1/3 of the cost of most other manufacturer's spool guns.
This little guy does all I need it to and more. It is really an excellent choice for welders that have engine drivers or those that weld aluminum in the shop connected to a MIG os Stock machine.
It has a lot of power and overloaded my 220 amp circuit.
I reccomend 36 Volt Battery with a good extension cord for heavier metals.
Wire Speeds of 50 Inches to 900 Inches per Minute.
Mind you I only tripped the breaker once and have welded a lot with this welder.

Most of the consumer Reviews tell that the "Ready Welder RWII #10250 MIG Welders with a MIG Spool Gun for running off Miller, Lincoln, Hobart, and Esab machines." are high quality item. You can read each testimony from consumers to find out cons and pros from Ready Welder RWII #10250 MIG Welders with a MIG Spool Gun for running off Miller, Lincoln, Hobart, and Esab machines. ...

Merlin New 22" LCD Flat-Screen Video Magnifier

You looking to find the "Merlin New 22" LCD Flat-Screen Video Magnifier" Good news! You can purchase Merlin New 22" LCD Flat-Screen Video Magnifier with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $2,935.00   

Product Feature

• Slimmer profile, weighs less
• Long lasting LED lighting for truer picture and color
• Simple, easy to use controls
• Ships in one box, simple to unpack, just plug in and begin
• Wide range of adjustable magnification from 2.4x to 77x

Product Description

See why the Merlin has become the clear choice in desktop video magnifiers for low vision users. With Merlin you can easily read books and magazines, read and write letters, manage your financial records view color photos, do crossword puzzles and even pursue a favorite hobbyKey Features:Slimmer profile, weighs lessLong lasting LED lighting for truer picture and colorSimple, easy to use controlsAvailable in 17", 19" and 22" monitorsShips in one box, simple to unpack, just plug in and begin3 year warrantyScreen easily pivots, both horizontally and vertically to provide the most comfortable viewing positionHighest quality Samsung® LCD for the best image resolutionWide range of adjustable magnification from 2.4x to 77xComputer Compatible (requires optional hardware part sold separately)You can personalize the image with 7 viewing modes

Merlin New 22" LCD Flat-Screen Video Magnifier Review

I recently purchased in December & it has totally expanded my enjoyment of reading. I can now read the paper without my wife having to shout it to me. Much better for her. It is so easy to use & has a # of degrees of magnification. I am a happy camper.

Most of the consumer Reviews tell that the "Merlin New 22" LCD Flat-Screen Video Magnifier" are high quality item. You can read each testimony from consumers to find out cons and pros from Merlin New 22" LCD Flat-Screen Video Magnifier ...

Shop-Vac 9840510 Two Stage SR Head Assembly, 55-Gallon

You looking to find the "Shop-Vac 9840510 Two Stage SR Head Assembly, 55-Gallon" Good news! You can purchase Shop-Vac 9840510 Two Stage SR Head Assembly, 55-Gallon with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $588.75 $574.32   

Product Feature

• Switch reluctance technology
• No motor brushes
• 10-Year motor warranty
• 2 Stage motor
• Made in the U.S.A.

Product Description

9840510 Features: -Wet / Dry head.-Switch reluctance technology.-No motor brushes.-2 Stage motor.-Made in USA. Specifications: -55 Gallon 12 AMP. Assembly Instructions: -Assembly required. Dimensions: -Dimensions: 19.5'' H x 24.75'' W x 24.75'' D. Collection: -Industrial SR collection. Warranty: -10 year motor warranty.

Shop-Vac 9840510 Two Stage SR Head Assembly, 55-Gallon Review

Seriously, this is the best vacuum on the market. The motor is super strong and the construction quality is superior to all other units available. We have used the competion's vacuums and they fall short in every category. I recommend this for anywhere you need a reliable, strong vacuum. The only problem is that this unit is so well constructed, you may never need to buy another one, ever. Thank you Amazon

Most of the consumer Reviews tell that the "Shop-Vac 9840510 Two Stage SR Head Assembly, 55-Gallon" are high quality item. You can read each testimony from consumers to find out cons and pros from Shop-Vac 9840510 Two Stage SR Head Assembly, 55-Gallon ...

Maxus MXW30901AV Pro-140 120 Volt 140 Amp Max Output Mig/Flux Core Welder

You looking to find the "Maxus MXW30901AV Pro-140 120 Volt 140 Amp Max Output Mig/Flux Core Welder" Good news! You can purchase Maxus MXW30901AV Pro-140 120 Volt 140 Amp Max Output Mig/Flux Core Welder with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $399.95 $350.00   

Product Feature

• 120 V MIG ready wire welder
• 5 heat settings for precise adjustment
• 140 amp max output
• Professional grade torch
• Wire feed with heavy duty drive deck

Product Description

• Welds steel 24ga. to 3/16" • Professional grade removable torch • Professional grade die-cast aluminum drive deck - Best In Class • Includes smoothing capacitor for smothest bead • Built in circuit breaker and thermostat

Maxus MXW30901AV Pro-140 120 Volt 140 Amp Max Output Mig/Flux Core Welder Review

I've been welding at work now for the past ten yrs and wanted a nice welder for at home. After looking at the rest - Hobart, Milliermatic, and Lincoln this one looked liked it would be the best and had the best price as well. I bought a refurbished one and kept my fingers crossed. I did get one that was scratched up a little bit but this is normal for previously used equipment. Overall the unit looked very good. Most importantly after hooking everything up and testing it on some 3/16" thick mild steel it worked beautifully. I don't bother with flux wire but use gas which is the way to go unless your outside. For a home welder and light commercial I'd highly recommend this welder.

Most of the consumer Reviews tell that the "Maxus MXW30901AV Pro-140 120 Volt 140 Amp Max Output Mig/Flux Core Welder" are high quality item. You can read each testimony from consumers to find out cons and pros from Maxus MXW30901AV Pro-140 120 Volt 140 Amp Max Output Mig/Flux Core Welder ...