Niagara Cutter 79520 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 8.75" Overall Length, 2.000" Cutting Diameter, 2.000" Shank Diameter

You looking to find the "Niagara Cutter 79520 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 8.75" Overall Length, 2.000" Cutting Diameter, 2.000" Shank Diameter" Good news! You can purchase Niagara Cutter 79520 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 8.75" Overall Length, 2.000" Cutting Diameter, 2.000" Shank Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $390.99    

Product Feature

• Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
• Coarse-pitch tooth design is suitable for machining soft, gummy materials
• 36-degree helix provides efficient cutting action and chip evacuation required to machine aluminum and nonferrous materials
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers greater abrasion resistance than uncoated tools
• Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel

Product Description

The Niagara Cutter RHC752 TiCN-coated cobalt steel coarse-pitch rougher end mill has three flutes and a 36-degree helix, making it suitable for machining soft, gummy materials such as aluminum or other nonferrous metals. The 36-degree helix offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. The end mill has three flutes to optimize the feed and cut rate, and produces a rough finish that can be smoothed by a second finishing cut. The coarse-pitch tooth design includes chip-breaking cutting edges that remove more material in less time than conventional end mills to support heavier cuts at higher speeds.

Rougher end mills are special-purpose tools whose chip-breaking cutting edges create small chips for heavy cuts and remove more material in less time than conventional end mills, with minimal vibration (chatter). The TiCN coating offers increased hardness and greater abrasion resistance than uncoated tools. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion. The tool’s square end creates sharp, unrounded cuts and has a corner chamfer on the cutting edges to provide more strength than standard square end tools in applications where cutting forces are high. The center-cutting design has cutting teeth at the end of the tool, so it can be fed straight into the workpiece like a drill bit for plunge cutting, and used for applications such as slotting and profiling. Cutting diameter tolerance is +0.005” to -0.000". The end mill has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter 79520 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 8.75" Overall Length, 2.000" Cutting Diameter, 2.000" Shank Diameter Review

Due to this being something that doesn't get used everyday, I haven't had the chance to use it. Thus...4 stars. When I do get to use it, I'll update this review.

Most of the consumer Reviews tell that the "Niagara Cutter 79520 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 8.75" Overall Length, 2.000" Cutting Diameter, 2.000" Shank Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Niagara Cutter 79520 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 36 Degree Helix, 3 Flutes, 8.75" Overall Length, 2.000" Cutting Diameter, 2.000" Shank Diameter ...

1018 Carbon Steel Rectangular Bar, Unpolished (Mill) Finish, Cold Finished Temper, ASTM A108, 3-1/2" Thickness, 3-1/2" Width, 36" Length

You looking to find the "1018 Carbon Steel Rectangular Bar, Unpolished (Mill) Finish, Cold Finished Temper, ASTM A108, 3-1/2" Thickness, 3-1/2" Width, 36" Length" Good news! You can purchase 1018 Carbon Steel Rectangular Bar, Unpolished (Mill) Finish, Cold Finished Temper, ASTM A108, 3-1/2" Thickness, 3-1/2" Width, 36" Length with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $363.71    

Product Feature

• 1018 carbon steel is a low-carbon steel that provides a balance of strength, machinability, formability, and weldability
• Meets ASTM A108 specifications
• Cold finished to the specified dimensions
• Annealed after shaping to modify the metal's properties
• Standard tolerance

Product Description

The 1018 carbon steel rectangular bar has been cold finished, has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM A108 specifications, and has a standard tolerance. The 1018 carbon steel grade has low carbon content for a balance of strength, machinability, formability, and weldability. This material can be heat treated for higher hardness. The bar has been cold finished, a process of removing the outer layer to achieve the specified dimensions. The bar has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.

Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Some tool steels are designed to resist deformation when used in elevated temperatures.

Tensile strength, used to indicate a material’s overall strength, is the peak stress it can withstand before it breaks. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

1018 Carbon Steel Rectangular Bar, Unpolished (Mill) Finish, Cold Finished Temper, ASTM A108, 3-1/2" Thickness, 3-1/2" Width, 36" Length Review

I really enjoy it when I receive metal stock that's virtually ready to be cut, powder coated, or finished. This is it, precut with highly accurate dimensions, all cuts are 90� as to the order, no scaling, no rust preventative ( except mild oil,grease coating) plastic wrapped, & ready to be cut.

This was cut, shaped, & powder coated for a pair of ballscrew bearing end mounts. I used one edge of the precut as my finished edge. Very happy!

Steve

Most of the consumer Reviews tell that the "1018 Carbon Steel Rectangular Bar, Unpolished (Mill) Finish, Cold Finished Temper, ASTM A108, 3-1/2" Thickness, 3-1/2" Width, 36" Length" are high quality item. You can read each testimony from consumers to find out cons and pros from 1018 Carbon Steel Rectangular Bar, Unpolished (Mill) Finish, Cold Finished Temper, ASTM A108, 3-1/2" Thickness, 3-1/2" Width, 36" Length ...

4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.16" Thickness, 24" Width, 48" Length

You looking to find the "4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.16" Thickness, 24" Width, 48" Length" Good news! You can purchase 4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.16" Thickness, 24" Width, 48" Length with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $284.96    

Product Feature

• 4130 alloy steel has good strength and hardenability, and provides better weldability than 4140 alloy steel
• Meets AMS 6350 specifications
• Annealed after shaping to modify the metal's properties
• Unpolished (mill) surface has no finish
• Standard tolerance

Product Description

The 4130 alloy steel sheet has been annealed, has an unpolished (mill) surface, meets SAE Aerospace Material Specifications AMS 6350 standards, and has a standard tolerance. The 4130 alloy steel grade contains chromium and molybdenum for strength and hardenability, with lower carbon content than 4140 alloy steel to provide better weldability. This material can be heat treated for higher hardness. The sheet has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.

Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Some tool steels are designed to resist deformation when used in elevated temperatures.

Tensile strength, used to indicate a material’s overall strength, is the peak stress it can withstand before it breaks. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material's ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.16" Thickness, 24" Width, 48" Length Review

This product is a selection of sheet metal squares of varying thickness, not a set of uniform thickness squares. The set comes with a scrap of green paper giving the thicknesses included, which I tried to save for this review but alas, it has escaped, just as it did from the person who wrote the original product description. If I find it, I will update this review with the exact thicknesses of the sheet metal squares. Otherwise product is fine. Arrived without any rust.

Most of the consumer Reviews tell that the "4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.16" Thickness, 24" Width, 48" Length" are high quality item. You can read each testimony from consumers to find out cons and pros from 4130 Alloy Steel Sheet, Unpolished (Mill) Finish, Annealed, AMS 6350, 0.16" Thickness, 24" Width, 48" Length ...

Polyamide Round Rod, Opaque Black, 2" Diameter, 4' Length (Pack of 1)

You looking to find the "Polyamide Round Rod, Opaque Black, 2" Diameter, 4' Length (Pack of 1)" Good news! You can purchase Polyamide Round Rod, Opaque Black, 2" Diameter, 4' Length (Pack of 1) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $543.41    

Product Feature

• Smooth finish
• Ultra strength kevlar filled nylon
• Meets ASTM D4066 specification
• Rod measures 2 OD by 4' length

Product Description

Nylon filled with Kevlar® aramid fibers result in a material that is strong, tough, and resists wear - up to 20 times greater than nylon alone.

Polyamide Round Rod, Opaque Black, 2" Diameter, 4' Length (Pack of 1) Review

I purchased this Poly amide rod to make some gears on my little lathe, but was not able, as its melting as I tried to machine.

Most of the consumer Reviews tell that the "Polyamide Round Rod, Opaque Black, 2" Diameter, 4' Length (Pack of 1)" are high quality item. You can read each testimony from consumers to find out cons and pros from Polyamide Round Rod, Opaque Black, 2" Diameter, 4' Length (Pack of 1) ...

Metcal MX-500TS-11 Tweezer and Soldering SMT Rework System, 100/120VAC

You looking to find the "Metcal MX-500TS-11 Tweezer and Soldering SMT Rework System, 100/120VAC" Good news! You can purchase Metcal MX-500TS-11 Tweezer and Soldering SMT Rework System, 100/120VAC with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,061.23 $999.00   

Product Feature

• Includes: MX-500P-11 Two Port Switchable Power Supply, MX-RM3E and MX-TALON Hand-pieces, WS1 and WST Work Stands, and Cartridge removal pad
• For soldering and SMT rework -- Always applies the correct level of thermal energy
• Use lower temperatures with fast temperature recovery -- Small footprint power supply prevents crowded workbenches
• Requires no calibration. Makes compliance with ISO 9000 simple
• Uses STTC, SMTC, STTC PowerTip and TATC Talon Tip Cartridges

Product Description

Includes: MX-500P 2-Port Switchable Power Supply with Power Cord, MX-TALON Hand-Piece with Cord, MX-RM3E Hand-Piece with Cord, WST TALON Workstand, (2) AC-YS3 Sponge, (2) AC-CP2 Cartridge Removal Pad Voltage Rating: 120 V

Metcal MX-500TS-11 Tweezer and Soldering SMT Rework System, 100/120VAC Review

Too bad the rating scale tops out at 5 stars, this system rates higher! This is the system the Big Boys use. Check out workbenches at NASA or any major military or aerospace contractor and this is what you'll find. There are two switches-Power and handpiece select. Nothing else is required as the unit self-regulates the tip temperature to the perfect level to flow solder evenly for a perfect joint every time! Recovery time between joints is instantaneous, and there's never a worry of damage to sensitive printed circuitboards. This soldering iron defines idiot-proof (as long as you keep the tip out of your eye!) Simply the best.

Most of the consumer Reviews tell that the "Metcal MX-500TS-11 Tweezer and Soldering SMT Rework System, 100/120VAC" are high quality item. You can read each testimony from consumers to find out cons and pros from Metcal MX-500TS-11 Tweezer and Soldering SMT Rework System, 100/120VAC ...

Global Glove SG2008SC Gripster Goatskin Sport Premium Grade Glove with Safety Cuff, Work, Medium (Case of 72)

You looking to find the "Global Glove SG2008SC Gripster Goatskin Sport Premium Grade Glove with Safety Cuff, Work, Medium (Case of 72)" Good news! You can purchase Global Glove SG2008SC Gripster Goatskin Sport Premium Grade Glove with Safety Cuff, Work, Medium (Case of 72) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $929.28    

Product Feature

• Premium goatskin using a special tanning process to give the feel of deerskin
• Black spandex two way stretch backing for fit and flexibility
• Extra tough knuckle protection
• Double premium goatskin padded palm
• Elastic cuff with hook and loop Velcro closure for a perfect fit

Product Description

Global Glove Gripster goatskin sport premium grade glove with safety cuff. Premium goatskin using a special tanning process to give the feel of deerskin. Added protection to the backs of the fingers and thumb. Outstanding dexterity and feel. Safety cuff for extra protection and ease of donning. Material: flexible Spandex over premium goatskin, rubber knuckle protection. Elastic cuff with hook and loop Velcro closure for a perfect fit. Reinforced thumb and palm with added padding. Black spandex two way stretch backing for fit and flexibility. Extra tough knuckle protection. Double premium goatskin padded palm. Elastic cuff with hook and loop Velcro closure for a perfect fit. Excellent for most industrial and mechanical applications. Excellent for working with pneumatic tools. Also a great sport glove. Size: medium.

Global Glove SG2008SC Gripster Goatskin Sport Premium Grade Glove with Safety Cuff, Work, Medium (Case of 72) Review

This sports glove offers the most out of glove. It is extremely comfortable, high quality goatskin does truly feel like deerskin, good dexterity and the safety cuff is constructed to fit nicely. I like these sports glove and would highly recommend them! All of my products purchased from global glove are highly satisfying!

Most of the consumer Reviews tell that the "Global Glove SG2008SC Gripster Goatskin Sport Premium Grade Glove with Safety Cuff, Work, Medium (Case of 72)" are high quality item. You can read each testimony from consumers to find out cons and pros from Global Glove SG2008SC Gripster Goatskin Sport Premium Grade Glove with Safety Cuff, Work, Medium (Case of 72) ...

Wearwell PVC 420 SpongeCote Tile-Top Anti-Microbial Mat, Safety Beveled Edges, for Dry Areas, 4' Width x 60' Length x 1/2" Thickness, Tan

You looking to find the "Wearwell PVC 420 SpongeCote Tile-Top Anti-Microbial Mat, Safety Beveled Edges, for Dry Areas, 4' Width x 60' Length x 1/2" Thickness, Tan" Good news! You can purchase Wearwell PVC 420 SpongeCote Tile-Top Anti-Microbial Mat, Safety Beveled Edges, for Dry Areas, 4' Width x 60' Length x 1/2" Thickness, Tan with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,856.93    

Product Feature

• 1/8" Thick vinyl surface bonded to a 3/8" thick Micro-Pure Nitrile composite sponge base
• Ideal for all dry work areas
• Cut lengths available
• 3 years warranty

Product Description

Same timeless appeal and exceptional feel, but now this mat is 100 percent anti-microbial (AM). The improved, non-porous vinyl surface is now constructed with an extra wear layer for exceptional abrasion and chemical resistance. Add that to its permanently anti-microbial properties and you have a great material for use in laboratories, pharmacies, healthcare facilities, pharmaceutical manufacturing, and even packaging and postal areas. The mats' exceptional comfort comes from its micro-pure sponge base. This unique Nitrile rubber composite is specifically designed for exceptional resilience and long life, and also offers permanent anti-microbial properties. Tile-Top AM is a standard 1/2" thick and ideal for any dry area where overall comfort and productivity are important. Choose anti-microbial for the health of your employees and your facility! Test specifications and results are MVSS 302 Flammability (surface) - "A" Rating. It has a flame spread of < 1.6 and is labeled self-extinguishing, MIL-P12420C Flammability (sponge) - Burned for < 5 seconds, ASTM F1677 Coefficient of Friction - Dry: COF = .79, Federal Standard 191: 1000g, CS-17 wheel, 1000 revs: Tabor Abrasion - .0250g lost (-.4 percent), ASTM D412 Tensile Strength - Longitudinal 1000 psi and Transverse 1000 psi, ASTM D412 Elongation - Longitudinal 110 percent and Transverse 100 percent, ASTM D412 Tear Strength - Longitudinal 14.3 lbs and Transverse 9.5 lbs, Wearwell Requirements Density (sponge) - > 7 lbs./ft(3), ASTM D395-98 Accelerated Compression - < 20 percent, ASTM D-1171 Ozone Resistance - Excellent: 7 days no change under 10x magnification, ASTM D1056 Temperature Range - -40 to 130 degrees Fahrenheit. NOTE: Tile-Top AM does not contain latex. Cleaning recommendations: Sweep regularly or dry mop the surface. These mats can be wet mopped with mild soap or detergent. For best results use a detergent like Ivory Liquid with a ph between 4.0 - 9.0.

Wearwell PVC 420 SpongeCote Tile-Top Anti-Microbial Mat, Safety Beveled Edges, for Dry Areas, 4' Width x 60' Length x 1/2" Thickness, Tan Review

We ordered two large mats for the kitchen and my back, knees and ankles feel so much better. We would recommend these for anyone with arthritis in back, knees and ankles. It only takes a second with a long handled mop to wet clean daily as it will attach link more easy than tile.

Most of the consumer Reviews tell that the "Wearwell PVC 420 SpongeCote Tile-Top Anti-Microbial Mat, Safety Beveled Edges, for Dry Areas, 4' Width x 60' Length x 1/2" Thickness, Tan" are high quality item. You can read each testimony from consumers to find out cons and pros from Wearwell PVC 420 SpongeCote Tile-Top Anti-Microbial Mat, Safety Beveled Edges, for Dry Areas, 4' Width x 60' Length x 1/2" Thickness, Tan ...