Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" Cutting Diameter

You looking to find the "Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" Cutting Diameter" Good news! You can purchase Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" Cutting Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $413.08    

Product Feature

• Four flutes produce a better finish than fewer flutes
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Ball nose end mills (also called ball end) create contoured surfaces
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

Product Description

The Niagara Cutter CB430 TiN-coated carbide ball nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s ball nose creates contoured surfaces where sharp corners are not required, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating is suitable for a range of materials. It combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" Cutting Diameter Review

Misleading Product Pictures
The Shank size is not indicated in description and it's not 1/4". This is a one piece no tapered 1/8" Ball end 1/8" Shank.

Most of the consumer Reviews tell that the "Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" Cutting Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 2" Cutting Length, 1" Cutting Diameter ...

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter

You looking to find the "YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter" Good news! You can purchase YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $388.45    

Product Feature

• Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
• Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
• Four flutes produce a better finish than fewer flutes
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials

Product Description

The YG-1 E5065 uncoated carbide extra-long-length square nose end mill has four flutes, a center-cutting design, and a 30-degree helix angle for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic. Extra-long-length end mills have longer cutting edges than long-length end mills for applications with a high depth of cut. (Feed should be reduced by around 50%.) Four flutes produce a better finish than fewer flutes. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

Carbide is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. Cutting diameter tolerance is + 0.0000 to - 0.0012". The round shank accommodates a range of tool holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

YG-1 manufactures drills, taps, end mills, and rotary tooling. The company, founded in 1981, is headquartered in South Korea and has a U.S. office in Vernon Hills, IL.

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter Review

really like the extra long shank! This comes in handy for those really deep relief cuts in materials over 1 inch thick.

Most of the consumer Reviews tell that the "YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 1" Cutting Diameter, 1" Shank Diameter ...

Wearwell PVC 497 Smart Diamond-Plate Medium Duty Anti-Fatigue Mat, Tapered Edges, for Dry Areas, 3' Width x 75' Length x 1" Thickness, Black

You looking to find the "Wearwell PVC 497 Smart Diamond-Plate Medium Duty Anti-Fatigue Mat, Tapered Edges, for Dry Areas, 3' Width x 75' Length x 1" Thickness, Black" Good news! You can purchase Wearwell PVC 497 Smart Diamond-Plate Medium Duty Anti-Fatigue Mat, Tapered Edges, for Dry Areas, 3' Width x 75' Length x 1" Thickness, Black with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,393.53    

Product Feature

• 3/16" thick Diamond-Plate surface bonded to a 3/8" thick Recycled Urethane composite Sponge Base
• Use on all dry areas
• Cut lengths available
• Green rating 80 percent post industrial material
• 1 year warrenty

Product Description

Your money goes a lot further when you buy smart. For the price of an ordinary sponge mat, get an abrasion resistant surface and a recycled urethane sponge base. The 100 percent recycled urethane composite sponge base is called "Rebound" because it just keeps on springing back. smart diamond-plate will wear at least 5 times longer than ordinary sponge mats. Smart mats are an extremely economical compared to any other diamond-plate mats. Smart diamond-plate is manufactured with 80 percent post industrial and post consumer materials. Smart is available in 2 thicknesses - standard is 5/8 inches thick and ultrasoft is 1 inches thick with a double thick sponge base for extra comfort. Test specifications and results are MVSS 302 Flammability (surface) - "A" rating. It has a flame spread of < 1.6 and is labeled self-extinguishing, ASTM Coefficient of Friction - Dry: COF = .68, Federal Standard 191: 1000g, CS-17 wheel, 1000 revs Tabor Abrasion - .2797g lost (-.81 percent), Federal Standard 191: 1000g, CS-17 wheel, 2000 revs Tabor Abrasion - .5436g lost (-1.58 percent), Federal Standard 191: 1000g, CS-22 wheel, 1000 revs Tabor Abrasion - 1.498g lost (-4.33 percent), Federal Standard 191: 1000g, CS-22 wheel, 2000 revs Tabor Abrasion - 2.617g lost (-7.55 percent), ASTM D412 Tensile Strength - Longitudinal 1259 psi and Transverse 1074 psi, ASTM D412 Elongation - Longitudinal 165 percent and Transverse 151 percent, ASTM D412 Tear Strength - Longitudinal 14.3 lbs. and Transverse 9.5 lbs, Wearwell Requirements Density (sponge) - > 6 lbs/ft (3), ASTM D395-98 Accelerated Compression - < 10 percent, ASTM D-1171 Ozone Resistance - Excellent: No change under 10x magnification, ASTM D1056 Temperature Range - 0 to 110 degrees fahrenheit. Cleaning recommendations: Sweep regularly or dry mop the surface. These mats can be wet mopped with mild soap or detergent. For best results use a detergent like Ivory Liquid with a ph between 4.0 - 9.0.

Wearwell PVC 497 Smart Diamond-Plate Medium Duty Anti-Fatigue Mat, Tapered Edges, for Dry Areas, 3' Width x 75' Length x 1" Thickness, Black Review

It does pretty much what it says. I stand on concrete and have plantar fascitis so I need a pretty comfy mat.
This one does the job, and is made of recycled material, which is the main reason I bought it.

Most of the consumer Reviews tell that the "Wearwell PVC 497 Smart Diamond-Plate Medium Duty Anti-Fatigue Mat, Tapered Edges, for Dry Areas, 3' Width x 75' Length x 1" Thickness, Black" are high quality item. You can read each testimony from consumers to find out cons and pros from Wearwell PVC 497 Smart Diamond-Plate Medium Duty Anti-Fatigue Mat, Tapered Edges, for Dry Areas, 3' Width x 75' Length x 1" Thickness, Black ...

Global Glove 300KV Ice Gripster Rubber Kevlar Glove, Cut Resistant, Extra Large, Dark Blue (Case of 72)

You looking to find the "Global Glove 300KV Ice Gripster Rubber Kevlar Glove, Cut Resistant, Extra Large, Dark Blue (Case of 72)" Good news! You can purchase Global Glove 300KV Ice Gripster Rubber Kevlar Glove, Cut Resistant, Extra Large, Dark Blue (Case of 72) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $496.99    

Product Feature

• Polycotton shell gives you the comfort of cotton and the durability of polyester
• A shallow dip line, natural rubber coating
• Cut and puncture resistance
• Excellent industrial and mechanical glove for all types of material handling
• Offer outstanding dexterity

Product Description

Global Glove polycotton kevlar glove. Seam free 10 gauge, 100 percent kevlar aramid version for added cut and puncture resistance shell, with a wrinkle rubber finish and a shallow dip line, natural rubber coating for extra grip. Polycotton shell gives you the comfort of cotton and the durability of polyester. The rubber gives the adhesive grip available and the ergonomic shallow dip. Offer truly outstanding dexterity. This ergonomic, shallow rubber dip, removes tension a from the finger and knuckles joints on the back of the glove allowing the hand to flex more naturally. The open back gives and seamless liner keeps hands cool and comfortable. 1039 Grams on american ASTM 1790. American level 3. Dark blue color. Excellent industrial and mechanical glove for all types of material handling. The cut resistant 300KV is excellent for handling glass, or sharp metal objects. Large size.

Global Glove 300KV Ice Gripster Rubber Kevlar Glove, Cut Resistant, Extra Large, Dark Blue (Case of 72) Review

This glove works great for my company, we are generally working in cold conditions and with heavy tools. They provide good warmth and grip for all of our needs. Highly recommended product and company!

Most of the consumer Reviews tell that the "Global Glove 300KV Ice Gripster Rubber Kevlar Glove, Cut Resistant, Extra Large, Dark Blue (Case of 72)" are high quality item. You can read each testimony from consumers to find out cons and pros from Global Glove 300KV Ice Gripster Rubber Kevlar Glove, Cut Resistant, Extra Large, Dark Blue (Case of 72) ...

Mitutoyo 3058S-11 Dial Indicator, #4-48 UNF Thread, 9.525mm Stem Dia., Lug Back, Yellow Dial, 0-100 Reading, 78mm Dial Dia., 0-50mm Range, 0.01mm Graduation, +/-0.04mm Accuracy

You looking to find the "Mitutoyo 3058S-11 Dial Indicator, #4-48 UNF Thread, 9.525mm Stem Dia., Lug Back, Yellow Dial, 0-100 Reading, 78mm Dial Dia., 0-50mm Range, 0.01mm Graduation, +/-0.04mm Accuracy" Good news! You can purchase Mitutoyo 3058S-11 Dial Indicator, #4-48 UNF Thread, 9.525mm Stem Dia., Lug Back, Yellow Dial, 0-100 Reading, 78mm Dial Dia., 0-50mm Range, 0.01mm Graduation, +/-0.04mm Accuracy with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $296.87    

Product Feature

• Stem diameter 3/8", 4-48 UNF (Unified Fine Thread) thread size, yellow dial face
• Measuring force: 3.0N or less
• Shockproof, jeweled bearing, with coaxial revolution counter
• Provided with inspection certificate

Product Description

Dial gauges with a large-diameter (78mm / 3.07") graduation face to ease reading, All types come with limit pins and an outer frame clamp as standard.

Mitutoyo 3058S-11 Dial Indicator, #4-48 UNF Thread, 9.525mm Stem Dia., Lug Back, Yellow Dial, 0-100 Reading, 78mm Dial Dia., 0-50mm Range, 0.01mm Graduation, +/-0.04mm Accuracy Review

Most plunger-type dial gauges have a range of 1 inch. That is fine for most applications, but if you need a significantly longer travel, it's not so easy to find a suitable gauge. The Mitutoyo 3058SB-11 has a throw of 50 mm (2 inches) and is available in either metric or inch graduations. I am using this as a readout on the X-axis of my small milling machine to eliminate backlash errors. Since all the parts I make are 1-2" long, this dial gauge provides an accurate, moderate cost solution. I mounted it using a magnetic base, so it is easy to move around for differing work setups.

Most of the consumer Reviews tell that the "Mitutoyo 3058S-11 Dial Indicator, #4-48 UNF Thread, 9.525mm Stem Dia., Lug Back, Yellow Dial, 0-100 Reading, 78mm Dial Dia., 0-50mm Range, 0.01mm Graduation, +/-0.04mm Accuracy" are high quality item. You can read each testimony from consumers to find out cons and pros from Mitutoyo 3058S-11 Dial Indicator, #4-48 UNF Thread, 9.525mm Stem Dia., Lug Back, Yellow Dial, 0-100 Reading, 78mm Dial Dia., 0-50mm Range, 0.01mm Graduation, +/-0.04mm Accuracy ...

Philips (418590) 17A21/END/2700-1100 DIM: 17w

You looking to find the "Philips (418590) 17A21/END/2700-1100 DIM: 17w" Good news! You can purchase Philips (418590) 17A21/END/2700-1100 DIM: 17w with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $296.97   

Philips (418590) 17A21/END/2700-1100 DIM: 17w Review

The quality of the light is excellent when full. The two issues when transitioning from an incandescent light to this Philps LED are a latency in the start up and the quality of the light when dimmed down is not as good as incandescent.

Most of the consumer Reviews tell that the "Philips (418590) 17A21/END/2700-1100 DIM: 17w" are high quality item. You can read each testimony from consumers to find out cons and pros from Philips (418590) 17A21/END/2700-1100 DIM: 17w ...

Twister XL3 Curtis Dyna Fogger

You looking to find the "Twister XL3 Curtis Dyna Fogger" Good news! You can purchase Twister XL3 Curtis Dyna Fogger with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $2,099.99    

Product Feature

• 2 Cycle gas engine powered backpack ULV aerosol sprayer is designed as a lightweight, compact unit ergonomically suited for long periods of use by the operator. It boasts the highest flow rates for true ULV sized droplets of any backpack sprayer on the market today.

Product Description

Twister XL3 Gas Motor Powered Backpack ULV Fogger/SprayerThe Twister XL3 is designed as a lightweight, compact aerosol generator that is ergonomically suited for long periods of use by the operator. It boasts the highest flow rates for true ULV sized droplets of any backpack sprayer on the market today. It features a remarkable and patented nozzle and blower system that outperforms all other sprayers of similar design.Mount onto vehicles for efficient application on large areas. Fastens to golf carts, ATV racks, MUVs, pick ups and more. Order the optional twin nozzles for even more flow rate.

Twister XL3 Curtis Dyna Fogger Review

I purchased this item because I had good performance from a Dyna Fog Cyclone for many years. I now have a larger area so being tethered to an electrical cord was too much of a limitation. When I received the unit, I was surprised to find that it did not have a throttle. The unit has been set at the factory to run at a specific RPM to optimize the fog droplet size. Also, the Curtis folks informed me that running at a consistent RPM will reduce wear and tear on the blower unit. In my case having a throttle is important to help me reduce noise for my neighbors when I walk from one area to the next while working. It may reduce efficiency and longevity but that is a price I am willing to pay to reduce the racket my neighbors have to endure. Darn those pesky mosquitos!

My application is for a residential setting and not too many hours per year on the unit so having a throttle to idle down is important to me. You can buy a throttle kit for $65 if you want it. This should be up front in the marketing information but it is not and I had to go through some emailing effort to get to the bottom of why Curtis does not have a throttle on their unit. The fogger works great and I will receive my throttle soon to fit my specific needs.

I recommend this product but be sure to know whether you want a throttle on it or not.

Most of the consumer Reviews tell that the "Twister XL3 Curtis Dyna Fogger" are high quality item. You can read each testimony from consumers to find out cons and pros from Twister XL3 Curtis Dyna Fogger ...