AEMC 405 TRMS Power Clamp-On Meter, 100 Kilohms Resistance, 1000V AC/DC Voltage, 1000A AC, 1500A DC Current

You looking to find the "AEMC 405 TRMS Power Clamp-On Meter, 100 Kilohms Resistance, 1000V AC/DC Voltage, 1000A AC, 1500A DC Current" Good news! You can purchase AEMC 405 TRMS Power Clamp-On Meter, 100 Kilohms Resistance, 1000V AC/DC Voltage, 1000A AC, 1500A DC Current with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $350.00    

Product Feature

• Digital clamp-meter measures AC to 1,000A, DC to 1,500A, AC and DC voltage to 1,000V, frequency to 20kHz, resistance to 100 kilohms, and power to 1,500 kilowatts
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Clamp with 48mm (1.89 inches) jaw opening measures current without touching or interrupting the circuit
• Meter detects phase rotation, measures total harmonic distortion (THD), and calculates power factor to determine the power efficiency of an installation
• Meets IEC safety standard 61010, and is rated for CAT IV installations to 1,000V

Product Description

The AEMC 405 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, resistance, and power in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes) and DC (direct current) to 1,500A. The clamp has two jaws that can close around an electrical conductor up to 48mm (1.89 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads, which are silicone-insulated for flexibility and resistance to heat and cold, is included for measuring AC and voltage to 1,000(V, voltage frequency to 20kHz (kilohertz), and resistance to 100kΩ (kilohms). Frequency can also be measured with the clamp. For power monitoring and analysis, the meter detects phase rotation, measures THD (total harmonic distortion) which can degrade the quality of the power being supplied by the system, calculates power factor to determine how efficiently an installation uses power, and measures single- and three phase real power to 1,500kW (kilowatts), reactive power to 1,500 kilovar (kilovolt-ampere reactive), and apparent power to 1,500kVA (kilovolt-ampere).

The meter has a rotary switch to select the property to measure, and a 10,000-count LCD with a backlight for visibility in low light that turns off automatically after two minutes. The inrush current function, with a selectable sampling time of 1ms (millisecond) or 100ms, analyzes surge current at startup and due to load increases in installations that are up and running. To maintain accurate measurements, the DC amp zero function removes residual readings caused by magnetization from high amplitude current measurements. The maximum/minimum function tracks the highest and lowest readings for a property for as long as the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The unit operates on four 1.5V AAA batteries, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.

This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. The meter meets IEC (International Electrotechnical Commission) safety standard 61010, and is rated for CAT (category) IV installations to 1,000V, which covers equipment at the origin of the installation, such as electricity meters and primary over-current protection equipment. It has CE (European Conformity) marking and is IP (Ingress Protection) 54 rated against dust and water spray. The unit comes with a hard carrying case.

Specifications

Maximum AC (alternating current) input	1,000A
Maximum DC (direct current) input	1,500A
Maximum AC voltage input	1,000V
Maximum DC voltage input	1,000V
Maximum frequency detected	2,000Hz for current; 20kHz for voltage
Maximum resistance detected	100 kΩ
Installation rating	CAT IV, 1,000V
Standards met	IEC safety standard 61010; CE marking; IP 54
Power supply	(4) 1.5V AA batteries
Weight	600g/21.2oz.
Dimensions (H x W x D)	272 x 92 x 41mm/10.7 x 3.62 x 1.61 inches

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Clamp-meters, also called clamp-on meters, have two jaws that fit around a conductor to measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp-meters diagnose problems in electrical equipment, wiring, and power supplies. All clamp-meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.

AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.

What's in the Box?

• AEMC 405 digital clamp-meter
• Test lead set
• Test probe set
• Alligator clip set
• (4) 1.5V AA batteries
• Hard carrying case
• Instructions

AEMC 405 TRMS Power Clamp-On Meter, 100 Kilohms Resistance, 1000V AC/DC Voltage, 1000A AC, 1500A DC Current Review

I give it 4 STARS **** instead of 5 STARS ***** because it is not a living thing which I can love, of course.
AEMC 405 Clamp-On Meter makes great measurements, especially to help become more energy-efficient.
I have measured AC-Amps, DC-Amps, AC-Volts, DC-Volts and HZ (Hertz a.k.a. Power-Frequency Cycles) so far.
AEMC 405 exceeds expections with NO Complaints, whatsoever !
I continue to consider the AEMC 405 to be the Tool-of-Choice after trying it for the first time when I became an owner of this great solidly well-built excellent Electrician Tool.

Most of the consumer Reviews tell that the "AEMC 405 TRMS Power Clamp-On Meter, 100 Kilohms Resistance, 1000V AC/DC Voltage, 1000A AC, 1500A DC Current" are high quality item. You can read each testimony from consumers to find out cons and pros from AEMC 405 TRMS Power Clamp-On Meter, 100 Kilohms Resistance, 1000V AC/DC Voltage, 1000A AC, 1500A DC Current ...