Apollo 77C-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 2-1/2" Solder End

You looking to find the "Apollo 77C-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 2-1/2" Solder End" Good news! You can purchase Apollo 77C-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 2-1/2" Solder End with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $337.22    

Product Feature

• Made of bronze for higher strength and corrosion resistance than brass
• Zinc-plated steel lever handle with vinyl sleeve for manual on/off control
• Full port flow for higher operating efficiency than standard port
• Pounds per square inch (gauge) (psig) rating of 600 for cold working pressure (CWP) and 150 for steam working pressure (SWP)
• Solder connections on both ends for semi-permanent connections to tubing

Product Description

The Apollo 77C-200 series two-piece inline full port ball valve is made of bronze and has a lever handle and solder end connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. Its maximum pressure is 600 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 150 psig for steam working pressure (SWP). The valve is inline for connecting two pipes going in the same direction and has solder end connections for semi-permanent yet reversible connection to tubing. Multi-fill polytetrafluoroethylene (MPTFE) seats and seals reduce the risk of valve leakage. This ball valve has a working temperature range of -20 to 500 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.

Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.

Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.

Apollo 77C-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 2-1/2" Solder End Review

I have used various valves over my life and these always the best out there. The amount of brass and thus it's weight, are far more than others. I rarely see leeks, far less than other brands. I go out of my way to buy and use Apollo vales.

Most of the consumer Reviews tell that the "Apollo 77C-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 2-1/2" Solder End" are high quality item. You can read each testimony from consumers to find out cons and pros from Apollo 77C-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 2-1/2" Solder End ...