AEMC CA7028 Wire Mapper Pro LAN Cable Tester

You looking to find the "AEMC CA7028 Wire Mapper Pro LAN Cable Tester" Good news! You can purchase AEMC CA7028 Wire Mapper Pro LAN Cable Tester with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $445.50    

Product Feature

• Hand-held LAN cable mapping and troubleshooting tester, indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires
• Unique graphical and digital display of fault information and length, indicates distances to opens and shorts and identifies location, display fault location up to 500' or 150m (user selectable)
• Built-in tone generator for tracing and locating cables, built-in service check function to detect telephone, 10BaseT, 100Mbit plus and token ring, works with TIA 568A/B, USOC and ISDN wiring schemes
• Visual and audible warning of live telephone network voltages, works with all category cables, rugged design weighs less than 12 oz (350g), complete with remote unit and mini patch leads
• Large high-visibility blue electroluminescent backlit display, active remote identifiers indicates Pass/Fail at remote end using green/red LED, up to 16 unique remote identifiers available

Product Description

Model CA7028 includes meter, soft carrying case, remote ID (#1), two patch cords, four x 1.5V AA batteries and user manual. The Wire Mapper Pro model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP and SSTP cabling equipped with RJ-45 connectors and wired to either TIA 568A/B (ISO 11801 and EN 50137), USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. In the event of opens and shorts, the Model CA7028 uses TDR technology to indicate if the fault is at the near end or the remote end of the cable, or if it is somewhere in between. It will then indicate the distance to the fault. The Model CA7028 has the ability to measure and indicate the length of the cable under test, using a Vp (Velocity of Propagation) set by the user, from a built-in library or manually. It will measure and report the length of all four pairs of wires in the cable under test. It also generates an audible tone that is transmitted into all four pairs on the cable under test. This can be used for cable tracing and identification in conjunction with a tone receiver. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit plus and token ring active service. Identify LAN wiring faults. Find distances (feet or meters) to opens and shorts. Test patch cords. Test for active service. Trace cable locations. Measure cable length. Map network layout. Range: 500' (150m). Accuracy: +/-5 percent. Cable types: UTP, STP, FTP and SSTP. Safety Ratings: EN 61010-1, EN 61326-1, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6. CE Mark. Index of Protection: IP54.

AEMC CA7028 Wire Mapper Pro LAN Cable Tester Review

This tester has served me for several years and has even lived through harsh military use. The on screen display also makes it easy to use for even the greenest of networking novices. This is a great product and I dread the day when mine finally kicks the bucket.

Most of the consumer Reviews tell that the "AEMC CA7028 Wire Mapper Pro LAN Cable Tester" are high quality item. You can read each testimony from consumers to find out cons and pros from AEMC CA7028 Wire Mapper Pro LAN Cable Tester ...