Diversified Woodcrafts P7211K30N UV Finish Solid Oak Wood Table with Plain Apron and Plastic Laminate Top, 60" Width x 30" Height x 21" Depth, 500lbs Capacity

You looking to find the "Diversified Woodcrafts P7211K30N UV Finish Solid Oak Wood Table with Plain Apron and Plastic Laminate Top, 60" Width x 30" Height x 21" Depth, 500lbs Capacity" Good news! You can purchase Diversified Woodcrafts P7211K30N UV Finish Solid Oak Wood Table with Plain Apron and Plastic Laminate Top, 60" Width x 30" Height x 21" Depth, 500lbs Capacity with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $304.49    

Product Feature

• Legs and aprons are constructed of solid red oak and are smoothly machined with a chemical resistant, UV finish
• Aprons are 13/16" depth by 4-1/2" height with heavy-duty 13 gauge steel corner braces
• 2-1/4" Square red oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied
• Tables are equipped with non-skid adjustable glides for precise leveling and rubber leg boots
• Some assembly required

Product Description

Legs and aprons are constructed of solid red oak and are smoothly machined with a chemical resistant UV finish. Aprons are 13/16" depth by 4-1/2" height with heavy-duty 13 gauge steel corner braces. 2-1/4" Square red oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. Tables are equipped with non-skid adjustable glides for precise leveling and rubber leg boots. Tops are screwed to the tables at the factory. Weight capacity is 500lbs. Measures 60" width by 30" height by 21" depth. 1-1/4" Plastic laminate top.

Diversified Woodcrafts P7211K30N UV Finish Solid Oak Wood Table with Plain Apron and Plastic Laminate Top, 60" Width x 30" Height x 21" Depth, 500lbs Capacity Review

I ordered this table to use as a rear desk in my office. It is a bit narrow to use full time as a computer table, but works for the intermittent use as I have it setup. The quality of the table is superior and the installation / setup was easy and took less than 5 minutes.

My only warning is to make sure that you check to make sure you want the table top or not as this company has options for both. My first table I ordered didn't have a top and I luckily was able to cancel the order before it shipped.

Most of the consumer Reviews tell that the "Diversified Woodcrafts P7211K30N UV Finish Solid Oak Wood Table with Plain Apron and Plastic Laminate Top, 60" Width x 30" Height x 21" Depth, 500lbs Capacity" are high quality item. You can read each testimony from consumers to find out cons and pros from Diversified Woodcrafts P7211K30N UV Finish Solid Oak Wood Table with Plain Apron and Plastic Laminate Top, 60" Width x 30" Height x 21" Depth, 500lbs Capacity ...

Tote-A-Torch Outfits - gw 33-12-ptc tote a torch w/carrier cyl & ck val

You looking to find the "Tote-A-Torch Outfits - gw 33-12-ptc tote a torch w/carrier cyl & ck val" Good news! You can purchase Tote-A-Torch Outfits - gw 33-12-ptc tote a torch w/carrier cyl & ck val with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $486.95 $467.16   

Product Feature

• Sold Individually

Product Description

331-12-PTC Features: -A light medium duty portable outfit that is extremely popular for general maintenance work.-W/check valves.-Cutting Cap.: 1/2 in [Max].-Welding Range: 3/16 in [Max].-Process: Cutting, Welding.-Price is for 1 Each. Dimensions: -Will weld up to 1-1/4'' and cut up to 6'' with optional larger tips.

Tote-A-Torch Outfits - gw 33-12-ptc tote a torch w/carrier cyl & ck val Review

I bought this Gentec Tote-A-Torch outfit several years ago and it has worked fine for all of my gas welding, brazing and cutting needs around the shop and the house. It came complete with empty 20 Cu/Ft Oxy and MC acetylene tanks, an MC tank wrench, single-stage regulators, a torch handle with check valves and a #1 tip, a cutting attachment with a #0 tip, 12' long hose set, striker, plastic storage tote and a pair of welding goggles. The torch handle uses standard Victor style welding and cutting tips. There is storage space in the front of the tote to carry the striker, cutting attachment and extra tips. For storage, you can wrap the hose around the top of the tanks and then stick the torch, tip down, into a hole located at the top center of the tote. I also added an 11" long Velcro cord wrap around the middle of the tote handle to better secure the hose set to during transport and storage. You can store welding or brazing rod in the other hole on the top far left of the tote. I really like the design of the plastic tote because the top handle is offset toward the center and the back part of the tote is a single piece as well as being flat, so you can lay the torch outfit on its back then drag it like a sled in and out of a crawl space and the tanks, brazing rod and things in the storage compartment won't fall out all over the place along the way. Its light enough to pull up the side of a building with a rope attached to the handle and also compact enough to fit through those small attic scuttle holes that everybody seems to have in their bedroom closets. Gentec has a wheel kit available for the tote [Catalog #CRT11W], but I don't really see the need.
This set is an import, but has held up well and at the time it was the most reasonably priced tote style torch outfit I could find. Overall, I am pleased with this torch outfit and would have no problem recommending it to anyone that is looking in to buying one.

Most of the consumer Reviews tell that the "Tote-A-Torch Outfits - gw 33-12-ptc tote a torch w/carrier cyl & ck val" are high quality item. You can read each testimony from consumers to find out cons and pros from Tote-A-Torch Outfits - gw 33-12-ptc tote a torch w/carrier cyl & ck val ...

360 Brass Rectangular Bar, Unpolished (Mill) Finish, H02 Temper, ASTM B16, 1-1/4" Thickness, 3" Width, 36" Length

You looking to find the "360 Brass Rectangular Bar, Unpolished (Mill) Finish, H02 Temper, ASTM B16, 1-1/4" Thickness, 3" Width, 36" Length" Good news! You can purchase 360 Brass Rectangular Bar, Unpolished (Mill) Finish, H02 Temper, ASTM B16, 1-1/4" Thickness, 3" Width, 36" Length with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $347.73    

Product Feature

• 360 brass, also known as free-machining brass, provides corrosion resistance and better machinability than 353 brass
• Meets ASTM B16 specifications
• Unpolished (mill) surface has no finish
• H02 temper has been cold worked to a 1/2 hard temper
• Standard tolerance

Product Description

The 360 brass rectangular bar with H02 temper is unpolished, meets American Society for Testing and Materials International ASTM B16 specifications, and has a standard tolerance. The 360 brass alloy, also known as free-machining brass, provides corrosion resistance and better machinability than 353 brass due to a higher lead content. The material has an H02 temper, meaning it has been cold worked to a 1/2 hard temper.

Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Copper, a term that applies to alloys containing at least 99.3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. It provides greater strength and better machinability than copper or bronze. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness.

Tensile strength, used to indicate the material's overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

360 Brass Rectangular Bar, Unpolished (Mill) Finish, H02 Temper, ASTM B16, 1-1/4" Thickness, 3" Width, 36" Length Review

I do some knife forging as a hobby, and was looking for some brass to make a letter opener for my Dad(loves brass). This stuff was less expensive by far than anything else I could find!

Most of the consumer Reviews tell that the "360 Brass Rectangular Bar, Unpolished (Mill) Finish, H02 Temper, ASTM B16, 1-1/4" Thickness, 3" Width, 36" Length" are high quality item. You can read each testimony from consumers to find out cons and pros from 360 Brass Rectangular Bar, Unpolished (Mill) Finish, H02 Temper, ASTM B16, 1-1/4" Thickness, 3" Width, 36" Length ...

Siemens Industry Mp120gf 20A Sp Gfi Breaker - Quantity 10 Murray/Siemens Electrical Distribution Equipment

You looking to find the "Siemens Industry Mp120gf 20A Sp Gfi Breaker - Quantity 10 Murray/Siemens Electrical Distribution Equipment" Good news! You can purchase Siemens Industry Mp120gf 20A Sp Gfi Breaker - Quantity 10 Murray/Siemens Electrical Distribution Equipment with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $429.90    

Product Description

Murray, 20A Single Pole Ground Fault Circuit Interrupter Breaker, 1" Space, 120V, Boxed.

Siemens Industry Mp120gf 20A Sp Gfi Breaker - Quantity 10 Murray/Siemens Electrical Distribution Equipment Review

Electricain installed in control panel of rental cabin, on hot tub circuit. Feel much safer
Installation was fast and easy

Most of the consumer Reviews tell that the "Siemens Industry Mp120gf 20A Sp Gfi Breaker - Quantity 10 Murray/Siemens Electrical Distribution Equipment" are high quality item. You can read each testimony from consumers to find out cons and pros from Siemens Industry Mp120gf 20A Sp Gfi Breaker - Quantity 10 Murray/Siemens Electrical Distribution Equipment ...

HONH312PL - 310 Series Two-Drawer

You looking to find the "HONH312PL - 310 Series Two-Drawer" Good news! You can purchase HONH312PL - 310 Series Two-Drawer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $296.27    

Product Description

Meets or exceeds ANSI/BIFMA and ISTA performance standards. 26-1/2 Case depth with 25 front-to-back filing inches per drawer. Letter or legal sizes available. Three-part, telescoping, steel ball-bearing suspension. Bright aluminum drawer pulls, label holders and thumb latch.

HONH312PL - 310 Series Two-Drawer Review

Made of metal -- just FINE for a home office or a small commercial office -- does what it was made for.

The finish is nice, the drawers glide in and out, and as for unwanted flex (which would denote thin metal and poor quality) there is not very much flex at all. These drawers are rigid, and this means longevity.

I use standard manila file folders -- not hanging file folders, as I find the regular manila folders easier to deal with -- I can fit a good deal of files in this file cabinet.

The drawers are deep - not like the cheaper file cabinets with abbreviated depth -- and the four drawers provide plenty of storage.

In order to prevent unwanted surprises, always load the bottom shelf first and work your way up, so the file cabinet does not topple over -- this is just standard and safe procedure and does not bear on the quality of this product.

Most of the consumer Reviews tell that the "HONH312PL - 310 Series Two-Drawer" are high quality item. You can read each testimony from consumers to find out cons and pros from HONH312PL - 310 Series Two-Drawer ...

JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase

You looking to find the "JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase" Good news! You can purchase JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,795.00   

Product Feature

• 16-inch band saw with a powerful 1-1/2 hp TEFC 115-volt motor
• 1-piece dual-tapered column design for greater rigidity and strength
• Precision computer balanced wheels; rack-and-pinion blade guide height adjustment
• Convenient block guides offer support and reduce friction
• 17-by 17-inch cast-iron table; weighs 310 pounds shipped; 1-year limited warranty

Product Description

Motor Voltage: 115/230V

JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase Review

Set up was extremely fast. 15 minutes including removing the rust coat on the table.
I didn't have any trouble dealing with saw on my own. I put the feet on by myself and managed to remove the wooden packing feet by myself. I'm not a championship weight lifter, but I am a pretty big guy 6' 1" 230 lbs.
I also thought adjustment on the guides lower and top was fairly easy.
My first cut was a 3 X 3 x 36 piece of curly rock maple. I sliced a thin 1/16 X 3 X 36 veneer from the face. No burning, minimal chatter considering the blade, and no noticable load on the motor.
I guided the piece through at about the same rate I would a similar piece of wood through a 21" Oliver I use to use at a shop I worked at.
No doubt about it, the machine is quiet and almost vibration free. I am very impressed with the smoothness considering the price, and the type of construction; the saw is not a cast iron monster like the olivers and deltas I am used to working with, it is fabricated metal.
The blade tracks perfectly with out adjusting anything but the blade tension to the exact marker for the blade size. That's a thrill.
The saw was delivered right to my garage, the package was somewhat damaged and they only strapped one 40" pallet right smack in the middle of the box (which didn't give me much confidence I expected it to come on a full pallet or crated)but the contents was not damaged, not a scratch or a ding.
I would give this bandsaw a 5 based on it's price and size if it weren't for the table. I took a Starett 36" straight edge and some winding sticks and the table is tweaked about 1/32" on one corner. Doesn't make for very accurate cutting. Hopefully it won't take too long to get a replacement table.
Have I used better saws? Yes
Have I used better saws at the same price range? Definately not.
The bad table aside, I would highly recommend this saw for any woodworker on a limited budget who wants the features of a resaw and bandsaw all in one inexpensive unit.

UPDATE Dec 20, 2004
For historical reference please read my review above. Jet makes a good bandsaw, and they responded promptly to my problem with the table. However Amazon does not allow Jet to replace defective parts. All replacement orders must go through Amazon.

Since Dec 1 I have been trying futilely to get the table replaced.
The first time I called their 800 number the rep never sent my request ahead to the "Appropriate Department". I have called once a week religiously and still no satisfaction.
I wouldn't be so bothered if this was just a cosmetic issue, but the saw is unusable without a flat table, it is just setting in my shop taking up space and collecting dust.
I would say to you, buy a Jet, but don't buy from Amazon unless you are ready for a lot of headaches and frustrations.

UPDATE Dec 28 2004
The manufacturer is finally sending me a replacement table. Got the saw Nov 24 2004, set it up Nov 25 2004 and hopefully I will be able to use it by January 5th 2005. Only 47 days after it arrived!

Most of the consumer Reviews tell that the "JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase" are high quality item. You can read each testimony from consumers to find out cons and pros from JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase ...

Pyrex Borosilicate Glass Plain Stemless Funnel, 75mm Top I.D (Case of 48)

You looking to find the "Pyrex Borosilicate Glass Plain Stemless Funnel, 75mm Top I.D (Case of 48)" Good news! You can purchase Pyrex Borosilicate Glass Plain Stemless Funnel, 75mm Top I.D (Case of 48) with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $458.97    

Product Feature

• Ideally suited for use in sugar analysis
• PYREX® stemless funnels are of molded construction with bottoms ground flat
• Manufactured from PYREX® borosilicate glass with carefully controlled wall thickness & mechanical strength

Product Description

Of molded construction with bottom ground flat; for use in the sugarindustries. All have 6mm opening.

Pyrex Borosilicate Glass Plain Stemless Funnel, 75mm Top I.D (Case of 48) Review

This is a pyrex glass funnel, 3 and 1/4 inches tall, and 4 and 3/8 inches wide (total width, or 3 and 7/8 inches inside width). The description may have included the fact that the opening at the bottom of the funnel is only 1/4 inch wide, but I don't remember seeing that number. I wanted the funnel for pouring coffee (hot coffee with milk added) into thermos bottles with mouths of various sizes. The smooth, graduated glass accomplishes this well, and the liquid goes through the 1/4 inch opening quickly enough. The overall value of using glass instead of a plastic funnel, or even a stainless steel funnel, is much better coffee taste.

Most of the consumer Reviews tell that the "Pyrex Borosilicate Glass Plain Stemless Funnel, 75mm Top I.D (Case of 48)" are high quality item. You can read each testimony from consumers to find out cons and pros from Pyrex Borosilicate Glass Plain Stemless Funnel, 75mm Top I.D (Case of 48) ...